1994 Mazda MX-5 Miata

Roadster Convertible

4 Cylinder 1.8 Liter

Manual

JM1NA3530R0518064

Gasoline

Power Windows

WOW let me leave it at that. This car is beyond the coolest and funnest car I have EVER owned, and for your information I own a Viper and an R1, and neither of them compare to this car! I have owned over 20 Miata's and if I could chose my favorite this one tops them all! Just getting into this miata makes it so much better than the rest. Once you are in you are secured by a roll cage ALL around you and a 6 point racing harness that hold you in tightly into the Miata racing seats (custom modified). The second you go to start it (which you have to turn the key then push the start button) you hear the powerful 1.8L engine fire up in front of you. You push in the stage 2 clutch and get into gear and you are off! The power this thing has is UNBELIEVABLE it literally feels like I am driving my viper because you get kicked back into the seats without even hitting it hard! Then you go to take a turn and you feel all the traction you have because of the roll cage, it is honestly unlike any car that doesn't cost over $100k! Not only that, when you want to stop, the brakes are super powerful and will stop on a dime! There is so much more I can say about this car, and if you want to know just give me a call or message! Anyways I honestly do not want to sell this car but I would like to sell this and my viper to purchase and Aston Martin. I took it to the track once since I have owned it, and it was my first time at the track and it was probably the funnest thing I have done and I recommend you get signed up at the track asap if you purchase this car because you will love it! Remember this car can also be 100% daily driver! It has both windows, one is power and drivers takes about 10 sec to install/uninstall. The heat and fans work excellent. The top doesn't leak or anything, and the car drives straight as an arrow! Also the passenger seat only takes about 60 sec to install! ***All the decals are magnetic or vinyl and can easily be removed without harming paint!*** Anyways here are all the details about the car that I can think of! If you have any more questions please feel free to contact me! Drivetrain: • Mobil 1 engine oil, Redline MTL transmission fluid and Redline 75-90 differential fluid used since purchase in 2005. • Enthuza stainless steel M1 Racer exhaust with Mazda Comp test pipe • ACT Stage 2 clutch and 8.8LB flywheel • Solid motor mounts • Mazda comp shifter bushing • Factory Torsen LSD (Replaced in 2008) • AC/PS delete • Zero emissions. May pass sniff test if you install a cat, but CEL is on from evap and EGR equipment, or lack thereof. Interior: • MiataCage.com V3 full cage -NASCAR drivers door bar, passenger door bars retain power window -Optional: X brace and front dash bar to retain full heater controls -Hoop mounted as high as possible for driver headroom, this means the outer edges of the hoop enter the inner skin of the hardtop. No modifications were made to the outer skin. • Radio, cruise, A/C, airbag, power mirrors, drivers power window, and rear defog wiring delete. All other electronics work perfectly. • Advanced Autosports radio delete plate with E36 M3 power window switch • Sound deadening removed • SafeRacer hardtop mounts • Black Hardtop in mint condition • Sparco 6pt harness (Valid through 2010). Sub belt is not installed in the pictures. • MiataCage.com window clips on drivers side. This allows you to run a window despite the door being gutted. Installation/removal takes less than 10 seconds, and once in, is fully secured with the door shut for driving. Chassis: • Russel SS brake lines (Front installed, rear included) • Axxis Ultimates pads front and rear • Tokiko Illumina adjustable shocks and springs (2” drop) Body: • The car was in a minor accident in 2006, no frame damage, however the radiator support was pushed back 2” on the left side of the car. I had the support pulled back by a reputable body shop, and bought new front fenders, bumper, and hood from Mazda. • Engine bay painted black and clear coated (PPG clear). • Front half of car is rattle canned. Its not pretty, but from afar you can't tell if you squint really really hard. I will split it 50/50 with the winning bidder if he wants it professionally painted (around $90-100) I can help arrange shipping if needed! If you have any more questions or want to come drive the car then please feel free to contact me! Call/Text/eBay Message Phillip K. (773) 368 0555 I will gladly pick up the winning bidder from Midway Airport, O'Hare INT Airport, or Union Station Chicago for no extra charge, just let me know the arrival time 24hrs ahead of time! ATTENTION! Your bid is a contract! Make sure you have the money to buy the car before you bid! So once again MAKE SURE you have the money to buy the car and that you are 100% sure you want the car! Due to bad experience with fake buyers, the $150 deposit is due within 24 hours of Auction end!