1985 Honda XR

JH2HE012FK6C5466

Clear

Bill of sale only as this is a non-registered vehicle in New Mexico. (eBay doesn't have a pull-down for this option). This XR80R is a restored bike in good condition. It is by no means a “concours” quality restoration, but is of decent quality and meant to be used. It starts very easily, runs well, shifts through all the gears and works as intended without any issues. Mileage unknown; This bike has clearly been used, but doesn’t appear to have been abused. It is nearly all stock with only the handlebars, levers and kill switch being non-Honda parts. The only missing item is the chain guard that mounts to the swingarm. There is a patch welded to the left side of the frame that appears to have been done in period (see photos), but the welds look solid and there are no cracks around the area. This area of the XR80 frame was prone to cracks and I have seen several bikes with similar patches/braces welded in this location. Completely restored with frame bead blasted, primed, painted and clear coated with correct Honda R119 Fighter Red (sort of an orangey red color that is hard to accurately photograph). The engine has a .010 over Wiseco piston and rings (recently done by previous owner) and new clutch plates. I replaced the kickstarter shaft and installed new gaskets throughout. Rebuilt carburetor, rebuilt forks with new seals, replaced the seat cover (original foam and base). All plastic is original and shows some wear and defects (see photos-welded crack in right side plate, mars and discoloration on gas tank, scratches on fenders) I polished the plastic to regain some of the original color/shine. The plastic is definitely not perfect, but it is NOT painted as I've seen on many bikes of this era. I will assist with loading for shipment, but will not crate or deliver to shipper. Local pickup is best. New parts include: Tires (front and rear) Clutch and brake cables Both sprockets and chain Fork seals Handlebars (Renthal aluminum with pad) Handgrips Seat cover Clutch plates Gaskets Air filter Decals Kickstarter shaft Also included with sale: PDF owners manual Original sprockets (both worn) original carburetor parts Several gaskets and O-rings that were included in the set Original kickstarter shaft and gears (the splines on the shaft are worm, but the spring, spacer and gears are fine.