1967 Chevrolet Chevelle

X7330049037

Clear

this is a 1967 malibu chevelle 2 door coupe no motor or transmission, i originally started the fram off restoration with the intent to make a street strip drag car. the body was removed from the frame and braced by me and then the floors were removed because they were rotted. i had the frame sand blasted and then i installed a cross member and boxed the rear lower control arm mounts with 1/8 inch plate.one side right i started to notch the outside rail for wider tires i removed about 15 inches of the side of the frame but i still have the piece unmodified and can be easly reinstalled without being noticeable. the body mount holes in the rear and front cowl area need to be repaired. the car body is now back on the frame because i put it into storage do to lack of funds to continue working on it. the doors open and shut excellently it still has good door panels headliner rear sear and glass i do not have the steering colum, body harness, front seat, it has four wheel drums no fuel tank. bumpers are in good condition front fenders have lower patches installed by previous owner. there is also some rott around rear window area. as for the rear end it is a 10 bolt i have a ton of pics if you want somthng particular just email me i have described this car the best i can it is a project that needs a lot of work but can be a very nice car. i cannot finish it and dont hmave the room to keep it. i can answer any questions you may have thanks. i also have originaly protecto plate info and owners manual in original dealer glove box jacket. i only posted some pic i do have more or can get special ifo as required also i can answer any questions you may have . Clean title text me or email me for some pics or if you have any questions best way would to email me. if any info needed please contact me before bidding thanks