1937 Ford Other

Manual

Clear

1937 Ford Hot Rod -Project Car Interrupted Project Car! This was to be a custom built swoop coupe reproduction of a 37 Ford. Project needs someone to complete the construction and end up with a show car that was envisioned. I will try to list as much detail as possible and will gladly answer any questions you may have. Exterior and interior renderings were created by Eric Brockmeyer and will be included in the sale. What is here and comes with the car: Custom built, laser cut, full boxed frame, smooth finished, sealed and painted gloss black. Built around the drive-train with final finish. Main body constructed of extra thick fiberglass, partially tubed in the back to accommodate 335 tires on 20” wheels, fully supported with cage sections, hinged/latched suicide doors, bottom of body is finished smooth, sealed and painted gloss black. Double layered trunk lid prept but no installed. Do have a front clip and hood that need to be fitted. Suspension-All set up for air ride system-Front has double A-arm suspension complete with bushings, ball joints and spindles, powder coated gloss black, Aerospace Components billet hubs and rack and pinion steering. Rear-Four point suspension with shortened 9” Ford housing, trailing arms chromed and all rests smooth and painted gloss black, shortened and race hardened 28 spline axles with bearings and C clips. Breaks-Aerospace Components complete 4 piston billet calipers with slotted and cross drilled rotors on all four corners. Rear brakes complete with internal e-brake. Engine-408 ci Ford (stroked 351 W) new crate motor completely built with best of everything; 10:1 compression, Edelbrock aluminum heads with full roller rockers, moderate cam, victor jr. intake, 8qt oil pan, high pressure oil pump, Billet Specialties Tru-track system complete with polished A/C compressor, PS, alternator, timing cover and all pulleys; MSD billed distributor with Taylor wires, Billet specialties valve covers. All sealed and painted copper color with clear coat unless otherwise polished. Mounted on custom made engine mounts with bushings and stainless steel bolts. Transmission-brand new Tremec TKO 600 5 speed manual with Lakewood bell-housing, Spec clutch, hydraulic salve cylinder, short throw shifter, electronic speedo pickup and cast yolk. All painted copper with clear coat to match engine. Mufflers-not installed but included-Seamless, polished stainless 2.5” turbo mufflers and polished stainless 4” exhaust tips (Correct holes out in body for these already). Seats-Porsche 996 Turbo black leather seats can be included or excluded if not desired by buyer. Body-need all headlights, taillights and all hinges as well as installation. Body parts needs to fitted and painted. Main body has been gaped, sanded, sealed and primed. Engine-Needs exhaust pipes, carburetor, radiator, all hoses, fuel lines, fuel tank and complete electrical system. Brakes-Need all brake lines Interior-Needs complete interior with gauges, pedal assembly, dash, and finish materials. All glass and sound insulation will also need to be provided. Wheels-Temporary transport wheels will be provided. Wheels in picture do not fit and are not included. Wheels and tires from 2010 Camaro This is hopefully a complete summary of the car at this time. All components included are brand new and have never been ran. I have invested a tremendous amount of money and time in to this and am sad to see it go. Just the engine and transmission are worth over $15K. The car is being sold AS IS where is, there is no warranty implied or offered. Please feel free to contact me with any questions. On successful bid, I will expect buyer to contact me within 24 hours, provide a $500 deposit and make arrangements for the remaining funds. Car is not operational. All shipping and transport cost as well as arrangements must be made by the Buyer.