1972 Chevrolet Vega

2 door

350

4-speed

1v77b2u235119

Clear

Gasoline

I have had this car for 30 years. Arkansas car with clear title. When I got the car it had the 12 bolt posi rear. I added a 350 v8 with 283 heads 2.02 & 1.6 valves, polished, ported. 272 competion cam. ( engine ran strong in 74 Chevelle). 4- speed Muncie Trans. Drive shaft was machine shop cut, balanced, installed. I never hooked up cluth linkage, never drove car; Backed car into shed on starter motor. And there it sat for 25 Years, pictures taken with car covered in dust. Car is remarkably solid, a little rust around A-post from leaky windshield. I cut spot-welds on dash and have donar dash ready to spot in it's place. Also a little rust on inside hood lip. Car comes with Alston 8 point roll cage; never installed ( little rust on the one end of some pipes, very cleanable.) Carpet and seats from donar 1975 vega hatchback - interior pieces stored in my basement all these years Real descent shape. I never will finish the car as have lost interest. It has volumes of potential, so happy bidding and good luck.On Aug-04-15 at 18:37:15 PDT, seller added the following information: I have had this car for 30 years. Arkansas car with clear title. When I got the car it had the 12 bolt posi rear(notice wood spring helpers in picture) I added 350 v8 with 283 heads 2.02 & 1.6 valves,polished,ported 272 competition cam.( This engine ran strong in 74 Chevelle). It Came with aftermarket engine mounts, notice towards front of engine. The car has a 4-speed Muncie trans. Drive shaft was machine shop cut,balanced, installed. I never hooked up clutch linkage, I have a aftermarket clutch cable bracket which comes with. I never drove car, never had engine running in this car: engine turns freely with wrench on front pulley. The car has been in the shed for 25 years, pictures taken with car covered in dust. Car is remarkably solid, a little rust around A-post from leaky windshield ( pictures) I cut spot- welds on dash and have donar dash ready to spot in its place. Also a little rust on drivers side floor pan and inside hood panel (pictures) The car comes with Alston 8-point rool cage and subframe connectors: never installed(little rust on the one end of some of the pipes, Very cleanable.) Carpet and seats from donar 1975 vega hatchback- interior pieces stored in my basement all these years-real descent shape. I will never finish the car as have lost interest. This is a project car- not a running& driving car. It has volumes of potential, so happy bidding and good luck. cash, certified check, money order, or paypal is acceptable payment method car is sold as is with no warranty On Aug-04-15 at 19:44:53 PDT, seller added the following information: I cannot switch photos to show you items mentioned, so please feel free to contact me for more pictures and/or questions.On Aug-05-15 at 11:52:59 PDT, seller added the following information: I bought the heads from a machinist ( like I said 30 years ago, so if my memory serves me right) . He put in new valves and springs enlarging the seats and hogging them out to accommodate the larger 2.02 & 1.6 valves. (stock was 1.94 intakes 1.5 exhaust).they were ported and polished. With that 64c.c. combustion chamber that a 283 has, compression is increased and makes substantial power gains. Also found the # on the Muncie 4-Speed it's P9T03A made in 1969.