Detail Info for: Chevrolet : C-10 None 68 Chevy c10 step side
Transaction Info
Sold On:
08/06/2014
Price:
$ 20000.00
Condition:
Mileage:
5000
Location:
Randleman, North Carolina, 27317
Seller Type:
Vehicle Specification
Year Make Model:
1968 Chevrolet C-10
Submodel Body Type:
Engine:
350
Transmission:
700r4
VIN:
Cs148z107924
Vehicle Title:
Clear
Drive Train:
Fuel Type:
Standard Equipment:
Optional Equipment:
Vehicle Detail
I have a flat red bagged Chevy truck that lays on the ground. Everything has been replaced from front to back Body: this truck is painted viper red base coat clear coat with a flattening agent in the clear to give it the satin finish. the entire body was been media blasted: I replaced the rockers and cab corners and I shaved the drip rail, I frenched in a smooth gas cap to get rid of the factory one. I shaved the vents out of the wiper cowl and I removed the wiper arm assembly but it can be replaced. I shaved the entire fire wall and did away with the factory heat and make the pass side match the drivers side, I also shaved the drain channel at the top of the fire wall. I put outer skins on the doors and shaved the handles and bought a new header panel and tailgate for the bed. Inside the bed is all spikes to replace the bolts that hold the wood in place, wood and stainless strips are all new as well. All front sheet metal is new a also. The sunroof was in the truck when I got so I left it. The rear fenders have been radius cut 3 inches to clear 22's and still bolt up factory Engine:Rebuilt 350 with a 488 lift cam and everything is chrome and/or billet. Block is painted base coat clear coat red to match the truck, rebuilt 700r4 transmission with a lockout kit for overdrive to work properly and a new driveshaft. Transmission is sitting on a tubular crossmember as well. Aluminum 3 core radiator with billet overflow and red top optima battery Suspension:Frame is painted the same viper red as the truck with shinny clear coat, front clip is painted and rear clip is painted, I did not paint under the cab itself. Front frame is z'd 5 1/2" to lay out on the ground with gussets front and rear to support the work involved. The rear has a big c notch so it will lay out also. The front suspension is out of a '80 model truck so it would be 5 lug and have disc brakes, the hydro boost brake setup is off the same donor truck, rearend is from the same '80 model donor truck and was blasted and painted along with rear disc brake conversion as well. All the suspension is painted house of color Orion silver and clear coated along with the hydroboost pump on the fire wall, wheels are 22x9.5 hello front and rear with painted inserts to match with 245/30/22 tires
