1966 Chevrolet Chevelle

Malibu Coupe

283

66-13617

Clear

1966 Chevelle 2 door coupeBODYNew 1 piece floor panNew 1 piece trunckNew tail panelNew full quarter panelsNew rear inner and outer rear wheel housingsNew rear deck filler panelNew rocker panelsNew lower windshield panel (needs to be welded)New radiator core supportNew upper and lower door hingesNew front and rear bumpers, along with original front and rear bumpersNew gas tankNew front inner fender wellsNew body bolt kit Trunk lid is originalDoors are originalHood is original Front fenders are not included When the car was purchased the original drip rails had been removed to try and make a smooth roof line The drip rails have since been added back, however to make this look right, a new roof would be required. (Reproduction roofs are available now). The current roof is only tacked in place and is easily removed. The firewall has been removed due to the lower floor pans being rusted out, and a poor attempted to smooth the firewall. A new firewall will be required to complete this car. (Reproduction firewalls are available now). All of the side glass, and rear window are usable, but do show signs of scratches from over the years. There is no windshield included. The car was completely dissassembled and media blasted prior to installing the new body panels. CHASSISThe frame was sandblasted and has been powered coated a dark gray.Energy suspension bushing have been installed in the upper and lower control arms.A Hotchkis total vehicle system suspension kit has been installed.An Eaton posi unit has been installed in the rear end.New front rotors, wheel bearings and calipers.New inner and outer tie rod ends. ENGINEThe car was an original 283, with a 3 speed transmission(Transmission is not included).The 283 engine has been disassembled, but everything is available, with the exception of the lifters, push rods, intake manifold and carburetor. The block looks to be in good condition, just needs to be cleaned up and rebuilt. Also included will be a standard bore 350 4 bolt main blockNew C.A.T lightened 4340 forged crankNew C.A.T 4340 6” rods MISCELLANEOUSThe front and rear bench seats frames will be included, but most of the interior was discarded as it had been badly abused over the years. Most pieces of the car were kept when it was disassembled, however depending on the level of restoration they may or may not be useable. Buyer is responsible for vehicle pickup, no shipping.