1976 Triumph TR-6

Convertible

6 cyl

Manual

Clear

There is so much to say about this car...I have owned it for 30 plus years, about 10 years ago i decided to take it apart and redo it to a much higher standard than factory, i spent the next several years gathering the parts i wanted, in some cases i bought new, some were used some NOS, at times i bought items from left over restorations from other people, needless to say I have more than enough to finish this car and lots of leftovers but I am 60+ yrs old and not in the best of health so now its time for someone else to finish. i have multiple transmissions, alt. starters, dist, doors, suspension components ect. but the items required to reassemble are all new and or rebuilt...The frame on a tr6 leaves alot to be desired so I had this one put on a frame machine and welded in gussets extra supports and boxed in the weak areas, when is was removed it was straight as an arrow and very strong all the weak areas were now addressed. the motor was freshened transmission was disassembled some new bearings installed cleaned an reinstalled, the clutch package is new the front an rear suspension rebuilt, gas tanked removed cleaned and sealed, all new interior still in the wraps the dash was re-veneered in a dark cherry with a new matching steering wheel. 2 sets of gages, even the paint is included in fact the hood, deck lid and door jams are already painted. everything it takes to put this back together is there right down to new emblems, the only big items missing that you will have to acquire is a carpet kit ( i Have the padding) a windshield and the canvas top (frame is good) and probably a few missing bolts and screws. all of which is readily availible. the hard stuff i have. this would be a perfect project for a father -son or for some one wanting a winter project for spring without spending a vast amount of money on unknown parts, its all here and then some just needs assembled, the motor and transmission are installed just finish the trim. note I will not part any of this out. it all goes to one high bidder ALL OF IT! you will need to pick this up, this much stuff cannot be shipped you will need a trailer for the car and a full size pickup for the parts. most of which is in tubs and boxes. any question on the details just ask I have included some pictures of the car before and after and a small sampling of some of the bits to reassembled.