1968 Ford Mustang

Coupe Coupe

302

4 Speed

8T01T113087

Clear

Gasoline

I am listing my 1968 Mustang coupe. The car is currently stripped to bare metal. What you see is what you get, no hidden surprises. The body panels are lined up. It has new quarters, new Ford tooling fenders and original doors. The floors and frame are solid, as well as the cowls and the previous owner welded in sub-frame connectors. The drive train is a newly rebuilt 1968 302 bored .030 new pistons, ARP rod bolts, cut crank and 289 performer cam, double roller timing chain, new water/fuel pumps, new clutch. The heads are ported 1969 351W with screw in studs and roller rockers. It has a performer intake & Edelbrock carb. It also has a completely rebuilt wide ratio top-loader 4 speed and an 8" posi (equalock) rear with 3:00 ratio. The Mustang has manual steering & manual disc brakes (SSB), headers and dual exhaust. The car is running and driveable (if you reassembled the lighting, etc.) The engine & transmission have zero miles. I have a new seat upholstery kit (black) and I have the original interior panels and seats. The car also has a new heater core, and I rebuilt the heater box. Please look carefully at the photos and at the body lines, a lot of time has been spent getting it to this point, and it is basically ready for primer filler/wet sand & paint. The original color is sunlit gold, but I started jambing in black. The wheels on the car have good tires, they are 15". I have the original turn signal hood GT rear valence and front valence which are already painted. Please look carefully at the photos and ask any questions. I reserve the right to end the auction at any time for any reason. The car is driveable (onto a car carrier) and starts & runs excellent. Make your own shipping arrangements, but I will help if I can. The car is located in Southington, CT.06489. CT does not title vehicles this old, you will be provided with a bill of sale. Both door VIN# and dash VIN#'s match. Item is being relisted due to a non-paying bidder. Please bid responsibly. On Mar-12-13 at 12:26:12 PDT, seller added the following information: Also included are the front and rear windshields (front is tinted), door glass is installed already. I have the front and rear bumper brackets (fronts are new). I will assemble the valences, hood & trunk onto the car, they have already been aligned and fit very well. I also have the hood inserts for the turn signals. I will also install the seats & I even have a decent black carpet & new headliner. I'm sure there's stuff I'm forgetting but all of the parts I have for this car will go with the car. If the car is going to be shipped a long distance I will wipe it down with a rust preventive that will have to be removed with cleaner prior to any paint. On Mar-13-13 at 12:41:04 PDT, seller added the following information: I also have the complete grille, new front bumper and tail light buckets, front parking light buckets as well.