1968 Chevrolet Chevelle

454

Automatic

Clear

This car is VERY fast. I don't want to sell it, but I am moving and can't take it with me. I have had the car for 15 years, and I have done a ton of work and dumped a TON of money into it. It is not a show car, but is still very sharp. As with any old hot rod or muscle car, it still needs a little work here and there. It has a roll cage with 2 door bar kits, and 5 point harnesses. It comes with a stock flat hood (not installed and painted to match) and a blower scoop. Comes with the rear seat (not installed). The rear seat can easily be reinstalled with a small modification to the rear part of the cage. No headliner. This thing is LOUD and FAST. Clear Colorado Title. Less than 300 miles on the engine, transmission and rear differential. 454 Bored .030 over B&M 177 Powercharger Roots Blower / Supercharger Edelbrock 750 CFM Holley Annihilator Digital Ignition with adjustable rev limiter Aluminum Heads (casting numbers for a 1967 Tripower 427 Corvette) Very valuable undamaged heads! Full Roller Blower Cam (Comp Cams) Matching Comp Cam Springs and Stud Girdles Pete Jackson Gear Drive Srp Pistons (8.5:1 for Blower) JE Full FLoating Wristpins Eagle H-Beam Rods good to 1200 HP Eagle Forged Steel Crankshaft Motor is Fully Studded both top and bottom. Aluminum Radiator / Electric Fan Hooker Pro Comp Headers (2.25 inch Primaries. One tube goes out and around frame due to large size) 3.5 inch collectors and Race Ready Y pipes Flowmaster 9 inch long Delta Series mufflers (car is VERY VERY loud with exhaust and Stupid loud uncapped) Turbo 400 (TH400) trans with Custom Driveshaft by Front Range Driveline. (Stage 3 shift Kit with manual Valve body) The valve body was retrofited to be a manual by a local trans shop, and I would replace it to a full manual reverse valvebody with trans brake (about 280.00 from Jegs) 3500 RPM Stall converter with antibalooning plate Line Lock Driveshaft Loop 12 Inch Posi Rearend with 4:10 Gears Ladder Bars Air Shocks Stock Fuel tank (I will include a Holley Blue fuel pump and a sump that will need to be welded to the bottom of the tank) 8 point roll cage with Door bar kits Rear seat included in the sale but not installed APC Racing Seats with 5 point harness Tach with adjustable Shift light 6 inch Cowl hood currently on the car, but the cowl is becoming delaminated from the hood. I will include another stock hood that is already painted to match. Disc Brakes in the front, drum in the rear. Power brakes and Power Steering More pics at http://rides.webshots.com/album/119392010fuIyon Car is also for sale locally so I reserve the right to end the auction early if it sells.