1970 Plymouth Barracuda

cuda Coupe

-

-

bp23cob128602

Gasoline

This is a 1970 cuda with a chassis in the box kit under her.... chassis kit lists for $5399 with a little axle un built with no body! link is below...... https://chassisengineering.com/shopDetails.asp?CatId=10&SubCatId=83&ProductId=1764 This is for a 1970 cuda project drag car part included 1970 cuda steel body or shell 1070 dash board with vin & clear title 1970 cuda a/c glass no front window 1970 cuda steel doors fiberglass one piece clip fiberglass trunk fiberglass grill Strange struts system strange dana 60 spool strange 35 spline axles strange rear disks-- Chassis engineering 21 point chassis with funny car cage "chassis in the box kit" with funny car cage Chassis engineering chrome rack & pinion Chassis engineering 4 link Chassis engineering adjustable rear coil overs Chassis engineering engine mounting plate rigged and mounted to the chassis but un drilled for water and good for any motor nascar collapsible steering column There is a lot of good steel here the rear tail light panel & rockers are good, rear deck and trunk jam is ok, the roof is pitted and has a hole at the bottom of the rear window, There are nos plymouth rear 1/4 panels installed not the best job but there and workable. All the window role up and down, she still has most inner framing and part of the rear wheel well so windows work and the car holds form mounted at only the rocker and at rear trunk rail.... All the parts were bought new and have never been used.... she is rigged and ready for power and body work.... disks may need to be cut and some parts will need a little clean up as the cuda has been sitting... Car can be shipped for 600 to 2000 in the usa.. I just transported a lifted K5 in the same shape for $600 OH to FLA.... I used Uship but transport is buyers choice.. The last photo on the car hauler is of the car be for it was cut and 1/4 panels were added Call with any ????? about the cuda... may be open to trade Thank you (954) 552 4562 Larry