1923 Ford Model T

-

6 - Cyl.

Automatic

XXXXXX

Gasoline

T-BUCKET PROJECT------- CHASSIS: CUSTOM FRAME 1 1/2 X 3 RAILS, MODEL A FRONT CROSSMEMBER, MODEL T REAR, 100" WB, HEADLIGHT/SHOCK MOUNTS, '76 CAMARO 10 BOLT REAR, SPRING BEHIND AXLE SETUP, '29 FORD DRILLED I-BEAM AXLE WITH NEW FORD SPINDLES W/FITTED KINGPINS AND BRAND NEW DISC BRAKE SETUP, SPLIT FORD WISHBONES W/ FORD TAPERED ROD ENDS, NEW IRON CROSS RADIUS RODS, REMOVABLE GM TRANS MOUNT, BATTERY BOX INSTALLED, ORIGINAL '29 FORD RADIATOR COVER, DROPPED 5' TO MATCH BODY FIREWALL. NEW REAR SHOCKSBRAKES: EVERYTHING IS NEW-- DUAL MASTER CYLINDER( DISK/DRUM) W/ BRAKE PEDAL AND PAD, 2PSI RESIDUAL VALVE, ALL BRAKE LINES ARE INSTALLED( NEED TO BE FILLED AND BLED), NEW BRAKES ON REAR AXLE( PADS, HRDWRE, CYLINDERS), FRONT DISK BRAKE KIT, BRAIDED LINES, BRAKE PRESSURE SWITCHFUEL: NEW POLY 8 GALLON FUEL TANK W/CHROME STRAPS, STREETROD FUEL FILTER, 3/8" ALUMINUM FUEL LINE INSTALLED FROM BOTTOM OF TANK TO FILTER W/ AN6 FITTINGS. BODY: NEW '23T FIBERGLASS BODY FROM SPIRIT INDUSTRIES, '32 DASH MOLDED IN, PLYWOOD FLOOR HAS BEEN INSTALLED W/BATTERY, MASTER CYL ACCESS HOLES CUT. I HAVE ORIG FORD WINDSHIELD MOUNTS THAT STILL NEED TO BE FIITED TO BODY. TRANS TUNNEL INSTALLED. BODY IS NOT SECURED TO FRAME YET, BUT THERE ARE HTREADED TABS WELDED TO FRAME ALREADY.ENGINE/TRANS: 1967 CHEVY 250 INLINE 6, NEW PISTONS, RINGS, RODS, BEARINGS, OILPUMP W/ PICK UP, CAM, LIFTERS, TIMING GEARS---I HAVE ORIG HEAD, ALT, BALANCER, PULLEYS, INTAKE. NEW ENGINE MOUNTS. WILL NEED DISTRIBUTOR, VALVE AND LIFTER COVERS AND FLEXPLATE. FUEL PUMP AND NEW OIL FILTER INSTALLED. TH350 TRANSMISSION INCLUDED. I HAVE EXHAUST HEADER FLANGES TO MAKE HEADERSWHEELS: REAR: CRAGAR SS 15 X 10 W/ 295/50'S, FRONTS: CRAGER SS 15 X 7 W 215/65'S-- --TIRES ARE OK, RIMS ARE A LITTLE RUSTY, BUT USABLE. SORRY TO SEE IT GO, BUT NEED THE ROOM, HAVE NO TIME TO FINISH . THERE IS NO TITLE, VIN #, CHASSIS #'S OR WARRANTEE OF ANY KIND, THIS IS A HOMEBUILT CAR ( MY 2ND). I WILL GIVE A BILL OF SALE STATING HOMEBUILT. CHASSIS WAS BEING SET UP FOR TRADITIONAL STEERING WITH A CORVAIR BOX. $500 NON-REFUNDABLE DEPOSIT 24 HRS AFTER AUCTION ENDS, REST IN CASH AT PICK UP. I WILL HELP LOAD. PROJECT WILL BE SOLD "AS IS". SERIOUS BIDDERS ONLY, IF YOU DO NOT HAVE THE CASH, DO NOT BID. PROJECT WILL NEED TO BE REMOVED ON FLAT BED OR TRAILER. I HAVE NEW MODEL A TAIL LIGHTS AND CUSHION FRAME MOUNTS FOR ENGINE( WILL NEED TO BE FABRICATED TO WORK). ASK QUESTIONS! THANKS FOR LOOKING! On May-23-11 at 14:28:06 PDT, seller added the following information: PICK UP ONLY, I WILL NOT SHIP OR DELIVER. ---------BUYER RESPONSIBLE FOR PICK UP. ------------I WILL HELP LOAD! On May-26-11 at 17:32:21 PDT, seller added the following information: THERE WAS A SBC ENGINE MOUNT TUBE CROSSMEMBER THAT WAS CUT OUT AND REMOVED TO MAKE ROOM FOR THE INLINE 6, I WILL INCLUDE THE CROSSMEMBER FOR THOSE LOOKING TO INSTALL A SBC. -------SPEEDWAY MOTORS SELLS THE TUBE TYPE FRAME ADAPTERS TO RE-INSTALL TUBE CROSSMEMBER.------