1955 Chevrolet Other Pickups

H55N Pickup truck

8 - Cyl.

Automatic

H55N004376

Gasoline

This was originally a 1/2 ton two wheel drive truck that was converted to four wheel drive. It has a tilt column and power steering and brakes were added. It is set up for a small block chevy but it does not have a motor. The brackets are still mounted on the frame and it still retains the manifolds.It still has the turbo 350 transmission(condition unknown) and the NP203 transfer case. The rearends are from a late 70's model Chevy 3/4 ton truck. The frame is original and I believe so are the springs. The spring hangers on the rearend were relocated and modified to match the original truck. The body is rough in areas such as the front driver and passenger floor boards.Cab corner where the passenger front fender meets at the bottom near the running borads. I would replace the running boards as well or remove them. Drivers door is in decent shape. Rust hole on the outside near the bottom hinge. The passenger door is in good sahpe. The bed sides are in good shape as well as the tailgate and passenger fender on the bed. The drivers fender has been repaired in the past and the bondo has come out on the very top of the fender. Front fenders have some small holes rusted through along the edges. The hood is reusable but it may be bowed. The seam in the middle is weak in the front near the emblem. There are a few pieces around the top and bottom part of the grill area that are reusable. The glass is all there but the doors are cracked, front window is discolored around the edges. The back glass is good and the corner glass is excellent. The frame is in good shape and the only rust I found was in the frame support located behind the cab but not bad. The title is in my hand and ready for transfer. I could not find a vin plate or stamp on the firewall or door post. I did call our County Clerk and she said that all I had to do was apply for a vin plate and they would send a new one. I'm going this weekend to pickup the application so if it leaves the state there will be less trouble being inspected. Feel free to ask any questions but I do want to state that the floorboards are very bad and that is why the cab looks crooked from the back. The front cab mounts are located here.