1980 Honda CB

Clear

Up For sale is my 1980 Honda CB-750. THE BIKE RUNS AND DRIVES It was converted from dual rear shocks to a 2009 CBR 600 mono rear shockIt has a 2009 CBR 600 rear swing arm2004 GSXR 600 front shocks.2004 GSXR triple tree.2004 GSXR front brakes2004 GSXR handle bars2009 CBR 600 rear brakeL.E.D turn signal front and rearL.E.D rear brake lightsGSXR polished aluminum rimsFH012 R/R from a Yamaha R1Cycle X IDS C and CP versions Power Arc Ignitions: http://www.powerarc.com/Has an oil filter adapter so you can use car oil filters.Fram ph2591, ph3600, ph3614, ph4967 and ph2870aCB 900 carb.H.I.D headlight with slim ballast.I converted the bike the fuel injection but the fuel rail developed a pin hole leak so I put the carbs back on. I will also include that in this auction. Fuel injection parts 1 modified gas tankMicro squirt http://www.microsquirt.info/indexright.htmMap sensorO2 SensorThrottle position SensorIAT sensorModified 2004 GSXR throttle bodyThe Bike Needs: the clear on the tank is coming off not dents just scratches.The carbs need cleaningSeat pan need to be recovered.The front brake master cylinder may be bad the brakes are soft.The engine and rims are polished aluminum however because it has been sitting for a while they are dull.No frame rust but the bike can used some paint. If you are not local to Dade, Broward or Palm Beach. Please Do Not Bid. If you are not familiar with carburetors or you are not mechanically inclined. Please Do Not Bid You are responsible for picking up the Bike. I have 100% Feed Back and I'll like to keep it that way. Edit: I'll try to get a video up to show it running On Mar-18-11 at 17:55:51 PDT, seller added the following information: On Mar-21-11 at 14:31:27 PDT, seller added the following information: I'm getting a lot of messages asking question here are the answer. The bike has a clean title.The clutch and transmission shifts through all the gears.The bike was completely re-wiredif you are willing to patch the pin holes on the fuel rail and if you can follow the micro squirt installation http://www.microsquirt.info/ then u can go fuel injection.I will not provide tech support there is no warranty. Again if you have no mechanical experience working on motorcycles or carbs please do not bid on my bike.If you are expecting a brand 2011 bike do not bid. The bike runs but needs work please read the description or send me a message with your question before you bid.