1969 Ford Mustang

Mach 1 -

8 - Cyl.

Automatic

9T02H153845

Gasoline

This is a 1969 Mustang Mach 1 fastback H-code that would be a good Family project. According to the basic Marti report that I have the car started life as a Wimbledon White/Black interior Mach 1 with a 351-2V, FMX Automatic and a 9 inch axle with a 3.00 standard ratio. The car also came with power steering and an AM radio. This car needs lots of repair but can be saved. The drivers side front shock tower assembly looks to be a replacement with the heavy duty wrap around brace. The passengers side has a crack in the back (pictured). It would need to be repaired or replaced. The front frame rails look good. The drivers side torque box has rusted through on the top side (pictured). The passengers side torque box looks ok. The floor pans are in need of replacing with the drivers front being the worst (pictured). The rear frame rail on the passengers side needs a rear extension. The drivers side will need to be completely replaced (pictured). The trunk floors will also need to be replaced. Most of the outer body panels will need to be replaced. The last body/paint job looks like it was probably done in someones back yard. Most likely the reason it was parked for the last 25 plus years. The doors were replaced from a 1970 and have bolt in glass on both sides. The interior is mostly complete, but needs to be completely restored. The motor in the car was replaced and is now a 302 and is missing the intake and valve covers. The motor does not turn over. Someone also added 1970 front disc brake spindles. The car will be sold with a bill of sale only and I have a basic Marti report that goes with the car. Do your research first and check to make sure this is the car you want before you bid. The car was last on the road in 1984 so it will need a complete restoration. Sold as is where is with no warranties or guarantees expressed or implied. Payment to be received within 7 days. Thanks