Detail Info for: GMC 6000 1983 GMC 6000 Flatbed Stake Body Truck Liftgate Runs

Transaction Info

Sold On:

10/22/2010

Price:

$ 2000.00

Condition:

Used

Mileage:

54000

Location:

Saylorsburg, Pennsylvania, 18353

Seller Type:

Private seller

Vehicle Specification

Year Make Model:

1983 GMC

Submodel Body Type:

6000 Pickup truck

Engine:

8 - Cyl.

Transmission:

Manual

VIN:

1GDE6D1AXDV518737

Vehicle Title:

Drive Train:

Fuel Type:

Gasoline

Standard Equipment:

Optional Equipment:

Vehicle Detail

I have an older 16 foot flatbed GMC truck for sale. It is in decent shape for the age but could still use a little tinkering. I drove it about 70 miles home with no problems. I bought it for a couple things that were mounted to the bed and i have no use for this truck. I have done a bunch of work to it to make it in better shape. I wouldnt have a problem driving it some distance for a fee or you could drive it home. Its in decent enough shape to be driven but how far is up to you. All tires have good tread, brakes work, inside of cab is very clean, new king pins, replaced exhaust manifold gasket on driver side, new muffler, new spark plugs, new plug wires, new cap and rotor. Power steering pump leaks when sitting, i dont know if there is a seal kit for these available or not, still works as long as you top it off with fluid. I rebuilt carb but it could probably still use a little adjusting but it starts right up. Truck has a good working lift gate on it. Truck is powered by a 350 Chevy V8 and it has GM Goodwrench stickers on it so i believe it was replaced with a factory crate engine but i have no idea how long ago. It is manual trans 4 speed with 2 speed rear. Everything seems to be working as it should but it is an old truck, maybe good for on a farm. I was going to take it for inspection but it needs a windshield because there is a crack on drivers side. The place i was going to take it didnt seem to worried about the little rust it has on the fenders. Other than that it is a solid truck. There is also 2 tool boxes with stainless steel doors on the drivers side of bed underneath. This truck is registered for class 8 weight at 26,000 pounds. You do not need a CDL to drive this. The truck comes with extra parts also like air filter, coils, caps, rotors, wires, starter, stuff like that. Frame is very solid, only surface rust. Fenders have a couple spots rusted but it is minor for the age. Lift gate has some rust but it also is in good working order. Any questions or if you want to see it call or text me at 570-234-4136 Jared