1991 Chevrolet Camaro

RS Coupe

8 Cylinder

Automatic

1g1fp23exml136819

Clear

Gasoline

AM/FM Radio

Thank you for visiting my auction! Up for sale is my 1991 Camaro RS 305 TBI with 700R4 Auto trans. Estimate by auction end there will be 180k miles on engine, trans and body. I've owned this car for almost 3 years and i've taken care of it by doing the proper level of maintenance. Last year i rebuilt the upper half of the motor including: all 16 valve grinding, new head gasket, intake gasket, throttle body gasket, header gasket with new Flotech shorty headers, also Flotech Y-pipe, spark plugs and wires, cap and rotor, water pump. Here is a list of all the items currently on the vehicle: Steering and Suspension: Moog front and rear swaybar links Moog outer tie-rod ends Moog tie-rod end sleeves New center link and Idler arm Lower balljoints Aftermarket front lowering springs and shocks (rear set i left off but will go with the deal) Engine and Trans: 200Amp HO Alternator New radiator New Starter Moroso chrome air cleaner New radiator fan motor New water control valve (heat didn't work) Performed trans service last year Inside: JVC arsenal head unit Kenwood 800W amp 2 Kenwood 12" Subs with custom fit box 6x9 Alpine 5-way speakers (rear) 4x6 Alpine 3-way speakers (front) Rear liftgate assist motor works fine NOTE: The 2 Kenwood subs, AMP and box will only be sold with this car for an extra $500. The wiring kit, speakers and head unit will remain in car and sold with deal. Lots of good new parts on this vehicle and it's an absolute blast to drive. However there are a couple things that aren't perfect. I got into a fender bender (as seen in pics) which crincled the front drivers side fender and bent down the corner of the hood. I was told the bumper cover could be fixed. Not too noticable unless ur right on top of it in broad daylight. Also the drivers door window motor is not attached to the regulator so you have to pull the window up each time you push it down. I truely support coming to look at this vehicle before bidding and please ask questions. I'll try to respond ASAP. Thanks all!