1971 Honda CL

CL350-300...

Clear

1970/1971 Honda CL350 K3 Scrambler new tires, tubes, and rim strips new NGK spark plugs (gapped to spec) new Dynatek spark plug wires new NGK spark plug boots new pod filters new exhaust crush gaskets new oil seals/gaskets new "All-Balls" headstock bearings. new petcock new brake shoes (front) new front brake cable new fuel hoses new ignition coils new condenser new points new battery new fuse holder/connector new fuse new wheel bearings (front wheel), plus a clean and re-greased axle custom ignition housing cleaned fuel tank (none of that Kream junk) cleaned and freshly greased rear axle and swing arm cleaned oil filter/sling fresh oil forks completely disassembled, cleaned inside and out, polished, and given new seals and fresh fork oil. carbs completely disassembled, cleaned, and rebuilt with new o-rings and gaskets. cleaned/greased rear swing arm bushing and rear axle/bearings Minnesota title in hand (matches engine) seat has some tears on the side small hole under one of the mufflers missing center stand blinkers do not work (probably a grounded wire somewhere) bike has a few dings and scratches here and there, but nothing out of the ordinary for a bike of her age. The effort on this bike was aimed more toward mechanics and less on cosmetics. Click the link to see a short YouTube video of the bike running. http://youtu.be/2GvT1kATmNI Summary She starts right up with the electric starter or kick starter, and rides well. Like any old bike, she needs some attention, but mostly superficial things like a good polishing, maybe some paint on the tank, etc. I've fixed/replaced most of the major things that are common problems with these old bikes, so you can just fill'er up, then grip it and rip it! Good Luck Bidding! Buyer responsible for shipping/pick-up. I will not store your bike for you so please arrange shipping/pick-up ASAP. I know of good transport services if you need suggestions. Note; Although this bike has had a lot of restorative work done to it, please be reminded that any 40+ year old machine will need occasional tinkering and maintenance to keep it running correctly. PLEASE CONTACT ME WITH ANY QUESTIONS BEFORE YOU BID! QUESTIONS ABOUT RESERVE PRICE WILL BE IGNORED. THANK YOU, AND GOOD LUCK BIDDING!