1976 Honda CB

Clear

This bike has spent more time in the garage than on the road. Most recently, I de-rusted the gas tank by electrolysis, installed a new petcock and fuel lines, and put new jets in the carburetor. Even so, I can't get it to run except on starter fluid. Each cylinder has 90 pounds compression, and there is a strong spark, but there seems to be a fuel problem. Other than that, the bike is in great shape. If you have questions, use the ebay question feature to let me know. On May-10-13 at 15:13:03 PDT, seller added the following information: Regarding the compression: the electric start button is missing and the starter motor seems bound up. I have a replacement starter button. However, in checking the compression, I have just used the kick start, and I'm not a big guy. I tried it again today and got it up to 120 psi. I added oil to the cylinder and that didn't make a higher reading. If it were turned over with the starter motor or if a bigger guy stomped the kick start, the compression number might be higher. I also neglected to say that a copy of the shop manual, the Haynes manual, the Clymer manual, and the original tool kit are included.