1980 Chevrolet Camaro

Z28 Coupe

8 - Cyl.

Manual

1p87lan503968

Clear

Gasoline

1980 z 28 camaro i bought the car after high school and started restoring it i stripped it all down and started from the ground up with all new ball joints. wheel bearings, tie rods, A-arm bushings, body mount bushings, and a neew brake system ( rotors, calipers, wheel cylinders, lines master cylinder) the car has a hotchkis sport suspension TVS kit which includes new preformance coil springs and leaf springs and oversized swaybars front and back. The engine is a 4 bolt main block with forged steel 383 stroker crank from scat. the connecting rods are forged H-beam 6in rods also from scat. The pistions are forged flat top from JE. The cylinder heads are edelbrock vic jr 64cc series with 2.08 intake valves. the camshaft is a soild roller from comp cams with roller lifters and roller rockers. The intake is also a edelbrock vic jr series that matches the heads. The engine has a 800 cfm holley carb and a MSD rev box, distributor, and coil. the engine was just built last year and has around 3k miles on it, the runs awesome. the interior is all new starting with the carpet door panels and seat covers. the dash has been recovered and a brushed piece of aluminum was made to replace the stock gauge cluster and new autometer gauges were installed. The car has t tops and all weather stripping has been replaced on the whole car everything works and the car is inspected in PA. The wheels are centerline 17in by 9.5 in the back and 17 by 8 in the front. The tires and wheels are brand new and less than a thousand miles on them any questions just ask and i will resond. local pickup only