1970 Plymouth Barracuda

Barracuda Coupe

8 - Cyl.

Automatic

Gasoline

This is a one of a kind, custom made 7/8 scale fiberglass body, drag race car. It has a tubular chassis with 2x4 frame rails, A arms, coil overs, four link with wishbone, Dana 60, GoodYear 33x15 slicks, the car weighs 2250 lbs, and has a 2010 NHRA chassis certification for 8.50. The engine a 371 cubic inch small block was built by Ceralli Competion Engines, and made 585 horsepower & 505 foot pounds of torque on the dyno. It has a forged steel crankshaft, Compcams solid roller cam, Indy cylinder heads and intake manifold. The transmission is a 727 Chrysler three speed, with roller bearings, a super sprag, trans brake, airshifter, and an Ultimate converter. The car has a Product Engineering fuel system good up to 1000 horsepower, it comes with full electronics, a Mega 450, MSD 7AL ignition box, Dedenbear air shifter and throttle stop. I also installed a Masterlube system in the car so the engine has been pre lubed before every start. I have run a best time of 9.40 @ 144 MPH, normal summer times are in the 9.50's @ 142 MPH, the car does not lift, and it runs straight as an arrow. There is abosolutely nothing wrong with this car, the only reason I'm selling it is to buy a 2002 Z06 Corvette, which I can use on the street and strip. If you have any questions My name is Pat and I can be reached @ 973 800 - 0290 Happy Bidding Filmed 5/15/10 at Mopar Nationals Raceway Park NJ