1993 Volkswagen Other

SLC Coupe

3.0 VR6

Manual

WVWEE4504PK004235

Clear

I bought this car mainly for the it's motor, it was completely rebuilt and the specs are below. I originally planned on swapping the engine and dash into on my '92. I did the dash swap but lost interesting the project and just sold my other Corrado. The car itself is in decent shape, the interior has some wear and the paint is a little rough. The body is rust free, the headlights could be replaced or thoroughly cleaned. The guy I bought it from had the car running and put about 1000 miles on the motor, then it sat for a while and he ended up selling a few parts off it (spark plug wires, battery and ECU). I was able to get it to run briefly using the parts off my other Corrado. The HVAC fan control in the dash needs to be connected and it's missing the fog light, heated seat and E-brake display light in the dash. All of these can be found either here on eBay or in the classifieds on VWVortex. This is a great easy project for someone who wants a fast CorradoEngineSchimmel Performance head Ferrea oversived valves Titanium retainers HD high rev valve springs Block bored to 3.0 liter displacement 83 mm Weisco forged pistons Eagle H-beam connecting rods Remanufactured injectors ARP hardware Glyco bearings 12.5:1 compression If you have any questions please don't hesitate to call, 704-430-2624 On Aug-03-14 at 08:43:13 PDT, seller added the following information: I bought this car mainly for the motor, it was completely rebuilt and the specs are below. I originally planned on swapping the engine and dash into on my '92. I did the dash swap but lost interesting the project and just sold my other Corrado. The car itself is in decent shape, the interior has some wear and the paint is a little rough. The body is rust free, the headlights could be replaced or thoroughly cleaned. The guy I bought it from had the car running and put about 1000 miles on the motor, then it sat for a while and he ended up selling a few parts off it (spark plug wires, battery and ECU). I was able to get it to run briefly using the parts off my other Corrado. The HVAC fan control in the dash needs to be connected and it's missing the fog light, heated seat and E-brake display light in the dash. All of these can be found either here on eBay or in the classifieds on VWVortex. This is a great easy project for someone who wants a fast Corrado. EngineHigh Compression 3.0 LiterSchimmel Performance head Ferrea oversived valves Titanium retainers HD high rev valve springs Block bored to 3.0 liter displacement 83 mm Weisco forged pistons Eagle H-beam connecting rods Remanufactured injectors ARP hardware Calico Coated Glyco bearings 12.5:1 compression Over $4000 spent, just on the engine build alone! If you have any questions please don't hesitate to call, 704-430-2624I am also selling a set of Vr6 Ecodes, OEM VR6 fogs with housings (NLA) and VR6 clear turns. All lights are Brand NEW in the boxes. $1150 shipped