1973 Plymouth Road Runner

v8

RM21G3R350376

Clear

1973 Plymouth Road Runner Body: This car was in good shape to start with. It belonged to a friend who was a professional body man and painter. It was his personal car and he went to great lengths to make the body laser-straight. There is no hood. There has been some support bars welded to stiffen the front of the car up between the fire wall and frame rail and in the lower radiator support area. There are sub-frame connectors welded in and I tried to take good pictures of all the work that looks nicely done. There has been a patch put in the driver's side floor pan. There has also been a few patches put in the trunk floor. The cowl area is very solid as is the frame rails, torsion bar cross member. This car is ready for final sanding and paint. The engine bay, cowl area and doors have already been jambed. The car was completely taken apart and from my inventory the bumper brackets, 1 headlight mounting panel, 1 lower windshield trim corner, emblems, door handles, antenna bezel and trunk lock cylinder as well as quite a few bolts are missing. Mechanical: The car has front disc brakes, front and rear sway bars, manual steering and brakes, and there is a adjustable proportioning valve inside the car. It has very large front torsion bars, hooker headers, good exhaust with Flowmaster mufflers, new gas tank, and extra long wheel studs. The rear-end is an 8 3/4 3.91 POSI ----completely rebuilt....new bearings, new POSI unit, new brakes. There is a 4-speed trans that will need to be re-built...bell housing, fly wheel , inspection cover, z-bar, clutch fork and drive shaft are all here. There is NO MOTOR but is set up for a small block. The rear tires are 295/50 16 and the front tires are 265/50 16s with like-new treat mounted on custom 16-inch cop car wheels. Interior: The interior will need to be completely redone. It was originally blue but the previous owner collected a complete set of nice, black hard plastic parts i.e. kick panels, door panels, sun visors. Most all of the cores to redo the interior are there except the rear seat. The back glass and rear quarter glasses are with the car but I could not locate the front door glasses or the windshield but they should not be hard to come by. There are bags and bags of bolts, clips and various parts. Some of the pieces are duplicated such as the grill, and tail lights and I am sure there are a few missing pieces that I missed. Miscellaneous: I am selling this car for the father of my friend and owner of the car who died. The car was completely dismantled for restoration. I did the best I could to collect all of its pieces and to describe it as accurate as possible. There has been hundreds of man hours put in this car and it is basically ready for paint. You will not be disappointed in the body. For more information please call Tom at (804) 837-4527.