1967 Ford Mustang

Coupe

289 2v

Automatic

7FO1C175239

Clear

I have up for auction a 1967 Ford Mustang Coupe 289 2V 3 speed automatic VIN# 7FO1C175239. The motor runs good and the transmission shifts fine. It originally came with A/C however the compressor and lines are not in the car. It does have all of the components under the dash and switches to have it reinstalled. I recently put a 2 ¼ dual exhaust on it which is connected to the factory manifolds. It has power steering and manual four wheel drum breaks. I replaced the gas sending unit last so all of the gauges work. The car is stock with no modifications. I have the seats however only the driver seat is in the car. The passenger side floor pan has been removed. The tires are practically new with close to 100% tread. The car will need a roof panel as the vinyl top cracked and allowed moisture to reach the metal. It will need full floor pans as they were replaced but not very well. They were basically tack welded in overlapping, incorrect. In addition it will need quarter skins for both sides or full quarter if you want to go that route. The previous owner also tried to patch the quarter, not a very good job. Also there is rust in the engine bay around the shock tower the will need a patch or a panel replacement if you want to take it that far. The car will need a new windshield, the rest of the glass is fine. The frame rails are in good shape. Should you have question feel free to send me an email. $250.00 DUE AT AUCTION CLOSE, REMAINING BALANCE IN CASH UPON PICKUP. Thanks for your interest, good luckOn Oct-07-12 at 18:59:39 PDT, seller added the following information: I have up for auction a 1967 Ford Mustang Coupe 289 2V 3 speed automatic VIN# 7FO1C175239. The motor runs good and the transmission shifts fine. It originally came with A/C however the compressor and lines are not in the car. It does have all of the components under the dash and switches to have it reinstalled. I recently put a 2 ¼ dual exhaust on it which is connected to the factory manifolds. It has power steering and manual four wheel drum breaks. I replaced the gas sending unit last so all of the gauges work. The car is stock with no modifications. I have the seats however only the driver seat is in the car. The passenger side floor pan has been removed. The tires are practically new with close to 100% tread. The car will need a roof panel as the vinyl top cracked and allowed moisture to reach the metal. It will need full floor pans as they were replaced but not very well. They were basically tack welded in overlapping, incorrect. In addition it will need quarter skins for both sides or full quarter if you want to go that route. The previous owner also tried to patch the quarter, not a very good job. Also there is rust in the engine bay around the shock tower the will need a patch or a panel replacement if you want to take it that far. The car will need a new windshield, the rest of the glass is fine. The passenger side looks like the drivers side, doors and fenders look good. The frame rails are in good shape. Should you have question feel free to send me an email. $250.00 DUE AT AUCTION CLOSE, REMAINING BALANCE IN CASH UPON PICKUP. Thanks for your interest, good luck