1981 GMC Caballero

Standard Cab Pickup

5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated

Automatic

1GTCW80K7BD501913

Clear

GAS

This has been my project car over the last several year and I really don't want to sell it but for various reasons it has to go. Most of the hard work has been done and some one is going to get a great deal. The reserve price is set at $2000. I've set this thing up with a suspension package that is designed for the road tracks. Below is a description of the work and parts that are with the car. The car was a southern car with no rust except for the floor pans where water got under the carpet. (now been repaired) The body has been removed from the frame, the frame and under body were sand blasted and then painted with por15 fallowed by a top coat of their hard coat gloss black paint. The speck list for new parts is as fallows, Wilwood 12.19" front brakes Ridetech double adjustable front shockwaves (AirRide) Complete compressor, tank, valves, pressure sencors, lines etc Global West Short upper control arms with taller steering Knuckles In front RideTech tubular lower control arms (front) Moser M9 Ford 9" style rear axle. with a Cast Iron US Strange carrier, Dayton Billet aluminum pinion support, Large bearings, Eaton TrueTrac Gear type LSD (100ft lb preloaded), Precision Gear 3.89 gears and Billet yoke. (axle is completely setup, painted and assembled) Heavy Duty Tubular rear control arms with double adjustable spherical rod ends. Fiber glass front and rear bumper with urethane air dam (not yet in stalled) new rear tailgate new steel 2" cowl hood new front header panel for double headlights as well as a sandblasted and painted new style core support and headlight holders. Set of 4 Crager 17x8 rims Urethane body mounts Double hump Trans cross member for dual exhaust (painted same as the frame) 2 Flowmaster 30 series mufflers (hard to find ones with the best sound) All new NOS door hinges and latches The body has been stripped of paint, the door handles and markers have been shaved, and the rough body work has been done. (still needs to be smoothed out) I have a complete Tan interior with a 40/60 bench for the car that is in descent shape, a second dash and other misc parts, The car needs to have the body work finished, a engine and transmission/driveshaft installed, a quicker steering gear, rear air bags, and rear brakes. Along with the other misc item like door seals etc. The wiring harness isn't in the greatest of shape but is usable, I was planning on making my own harness in many areas where all the custom work was to be done. The car currently sits as a rolling chassis. The Body is mounted as well as the core support. All the parts are in one place easy to load on your trailer or how ever you wish to transport. The photos are of most every thing and I can get specifics of any thing else you need. I'm sure I have forgotten some things. I would happy to talk to you about it over the phone or by message (just ask me for my number). Thanks for the interest Ben