1980 Volkswagen Rabbit

2.0 ABA from '94 Jetta

Manual

53A0025159

Super clean and well cared for mk1 Scirocco originally set up to be a track car. Featured in April 2005 issue of Eurotuner Magazine, which I have and will give to new owner. Selling because I just got a promotion and will now be commuting 50 miles a day roundtrip. Have an old Mercedes as well, and need to get a basic commuter instead of a fun toy like the Scirocco. It is a very comfortable car though. Rides smooth and nice, and pulls hard in every gear! Does not have cat on at present but the car would pass smog with a stock cat and if you want to have the car BAR'd you'd just need the stock exhaust manifold for a MKIII VW with a 2.0L ABA and the stock airbox. Text Ryan if interested. (916)548-7244 1980 Scirocco I 2.0 8V (A1 2 Door) Mileage: 82,000 and change Body/Paint: 8/10 Engine/Transmission: 9/10 Reliability: 10/10 (Has never let me down. Driven daily, and up and down CA on several 600+ mile trips) Exterior: -Euro bumpers -H4 headlights w/ French spec high beams -Zender Rear Wing -Rabbit small duckbill -TT antenna -Smoothed rear wiper, antenna hole, and mouldings -Glass moon roof -Red tinted rear blinkers Interior: -Corrado Leather Seats w/ matching re-covered rear bench -Golf/Jetta A2 fuse box, dash harness, switches, and instrument cluster w/ functional MFA -Mk1 Scirocco steering wheel and horn button (black) -Momo pedals -Custom black vinyl Headliner w/sunroof -VW snowmats -Rabbit 'L' center console -Optima battery relocated to trunk with cut off switch -TMI carpet kit w. dash cover -Kenwood CD/stereo w. front aux input & Boston Acoustic 5.25" 2-way speakers Engine, Trans & Exhaust: -CE2 engine wire harness -Bosch EFI (Motronic 5) with GIAC chip -50k miles on refreshed, balanced and blueprinted ABA block w/ SCCH stage 2 ABA head, TT High lift valve springs, Titanium retainers, Mk4 lifters, Adjustable Cam Sprocket, Custom intake manifold with ABA Throttle body, external oil cooler. -Eurosport 4-2-1header and exhaust -Diesel motor mounts w/ poly front snub mount -New clutch cable 06/2012 -9A tranny w/100m Axles, Missing Links shift linkage, ACT Pressure Plate, ATE Vented/Slotted rotors w/ EBC green stuff pads, New brake vaccum booster Suspension, Wheel & Tire: -KW Variant 2 damping adjustable coilovers (needs 2 stripped collars replaced - ride height not adjustable in rear at this time) -Autotech Solid Rear Swaybar (28mm) (comes with front 19mm off car) -Eurosport Upper Front and Rear stress bars -16V Lower Tie Bar -Poly Rear Axle and Front A-arm bushings-14x6.5 BBS Basketweaves with 185/60R/14 tires Needs: -Brakes need new pads at some point soon. Not urgent, but at some point in the near future. -Paint looks very good, but does have rock chips in a few sections. (Mainly at front of hood and behind front wheels.)