1970 Ford Mustang

Mach 1 Other

-

-

0F05M204034

Gasoline

Re listed with Lowered Reserve at $12k You will not find a nearly complete Rust Free Mach 1 in great condition at this price! Note listing for sale NOT including the Motor & Transmission! Many of you inquired about the original parts and pieces not previously listed? So here it is.. please read on The original 351C 4v and close ratio 4spd are not available. All parts pieces shown in the photos will be included in the sale! Please note: as parts were removed for bracket racing weight reduction they were solvent tank cleaned, packaged with the bolts/screws (many in the proper holes already) so they could easily be reinstalled! Great care has been taken to preserve items. Roll bar could easily be cut and removed!ALWAYS GARAGED, kept clean, out of the rain and sun. This is a solid car that has earned respect, always maintained and in very good condition. “Seriously, I could not have made this any easier? A cave man can figure it out.”Owner since 1993 NOT butchered in any way. Modifications made to improve from original. Pics will show both Street legal tires and Race slicks, ET street tires currently on car. Original Louvers w/ hinges and tie downs (NOT the lame cheapo reproductions seen on most restorations) 4 speed clutch pedal and linkage Gas tank w/ filler neck, sending unit, in awesome condition no rust! (I riveted an aluminum plate where the original tank mounts and put the fuel cell atop, original tank will drop right back in) Rear seat assembly Wiper motor and arm assembly Twisting hood pin assembly springs, anchors, bolts Blower motor and vent assembly Power brake booster assembly Shock tower brace Inner shock tower spring braces rear shock mounts Various small items: front license plate mount and support bar, etc (as seen in photos) New or recent <1yr: Tires, Body work & primer Additional Photos and images of progress and Marti Report can be seen at http://www.todayonmars.com/?p=456 Notable Improvements: ** Fender corner pieces were grafted into the fenders for a cleaner no-line appearance ** All OEM metal no fiberglass panels ** NO holes drilled in fender aprons, fuel regulator mounted on battery bolt hole, coil mounted on voltage regulator holes, custom mount made for oil filters mounted in sway bar holes ** Electric fuel pump BG280 and 10 gallon fuel cell mounted to be easily removed, no cutting of original metal ** Stock engine wiring & lights harness tucked and wrapped under the fender for clean engine bay no messy wires! ** Engine electronics MSD 7 mounted on a plate behind the glove box to remove from engine bay, battery relocated to the trunk ** Battery cut off switch mounted in back up light no cutting of original metal anywhere on body of car ** Door panels custom made without the arm rest as originals interfered with the roll bar If one desired for originality, the roll bar could easily be cut and removed (note the welded plates on the floorboard), the included rear seat, clutch pedal, blower motor and windshield wipers put back into place, along with the gas tank. round up a 351C 4v and close ratio 4spd, paint it Dark Ivy Metallic Green, and tad-ha! Bare in mind if you want to blast down the drag strip the roll bar is necessary and legal to 10.20 et More Details: 8 point roll bar by Chris Alston Chassis Work Ladder bar rear suspension with coil over shocks by Chris Alston Chassis Works (still has original wheel wells) Shock towers notched (easier access to spark plugs and valve cover removal, increases shock tower strength) Engine electronics MSD 7 Under dash wires hidden from engine bay (note: heater core/defrost currently removed, radio inop) Electric fuel pump BG280, 10gallon fuel cell, 1/2" fuel line from pump to regulator. 9"rear 4.86:1 ratio full spool by Strange Engineering Vehicle listed for sale locally and on eBay and reserve the right to cancel the auction or sale at any time. Please email any questions prior to bidding, THANK YOU!