1997 Honda CBR

JH2PC2507VM604680

Clear

UP FOR SALE IS THIS 1997 CBR600F3. I BOUGHT THIS BIKE LAST YEAR WITH A BLOWN MOTOR AND IT WAS LAYED DOWN ON ITS RIGHT SIDE. I STARTED BY REBUILDING THE ENGINE ROD #3 HAD A SPUN BEARING SO I INSTALLED AN APE POLISHED AND KNIFE EDGE BALANCED CRANKSHAFT, STOCK F3 PISTON AND RODAND ALL NEW MAIN AND ROD BEARINGS. WHILE I HAD THE ENGINE APART I DECIDED THE TRANSMISSION HAD SOME WEAR ON IT SO I INSTALLED A FULLY BACKCUT AND POLISHED TRANSMISSION. WHILE THE HEAD WAS OFF I PULLED THE VALVES AND CLEANED THE HEAD UP I ALSO SHIMMED THE VALVES BACK INTO PROPER SPEC. SOMEWHERE ALONG ITS LIFE THE F3 CARBS AND RAM AIR WERE TRADED FOR F2 CARBS AND AIRBOX. I LEFT THIS SETUP ON THE BIKE BECAUSE THE CARBS WERE JETTED AND THE ENGINE RUNS EXCELLENT THIS WAY. BIKE ALSO HAS A SHORTENED YOSHI CAN ON IT THAT IS A LITTLE TOO LOUD FOR MY TASTES, BUT SOUNDS GOOD OTHERWISE. AS FAR AS BODYWORK I INSTALLED A NEW WINDSCREEN, NEW MIRRORS, TWO NEW SIDE MID PANELS, AND NEW BODY BOLTS. THE FRONT FENDER HAS TWO CRACKS IN IT BUT IS HOLDING UP WELL. EVERYTHING ELSE YOU SHOULD BE ABLE TO SEE IN THE PICS. TIRES ARE GOOD CHAIN AND SPROCKETS ARE GOOD AND THE BRAKES WORK WELL. ALL LIGHTS WORK AND ALL GAUGES WORK. THE ODOMETER WORKS AND THE SPEEDO BUT THE TRIP METER DOES NOT. ALSO THE RADIATOR FAN SWITCH DOES NOT WORK SO I HARD WIRED A MANUAL SWITCH FOR IT NEXT TO THE IGNITION SWITCH. I HAVE PUT ABOUT 400 MILES ON THIS BIKE AND IT PERFORMES FLAWLESSLY!!! NO ISSUES WHATSOEVER!! READY TO TAKE HOME AND RIDE!!!! I WILL ALSO BE WILLING TO SHIP THIS BIKE (CONTACT ME FOR DETAILS OR ANY OTHER QUESTIONS PATRA729@GMAIL.COM) I HAVE MORE PICTURES IF NEEDED THANK YOU HAPPY BIDDING!! BIKE IS ALSO FOR SALE LOCAL SO I RESERVE THE RIGHT TO END THIS AUCTION AT ANY TIME