1999 Honda TRX 300 4X4

Clear

THIS IS A 99' HONDA 300 4X4. I BOUGHT THIS BIKE FROM A CUSTOMER WHO WAS LOOKING TO UPGRADE TO A CAN AM. I AM A SERVICE MGR AT A POWERSPORTS DEALERSHIP, SO BY NATURE I WENT THROUGH THE BIKE AND FIXED EVERY LITTLE THING EXCEPT THE BRAKES. I REPLACED THE FRONT WHEEL BEARINGS, FRONT HUBS, FRONT STEERING KNUCKLES, REPLACED ALL THE BEARINGS AND SEALS IN THE REAR END (DID NOT REPLACE PINION AND RING GEAR). I REPLACED THE REAR DRIVE AXLE ALSO. I CHANGED ALL THE FLUIDS IN THE BIKE, REPLACED THE AIR FILTER, OIL FILTER, AND SPARK PLUG. THE MOTOR IS IN GOOD SHAPE AND STILL HAS A LOT OF COMPRESSION. THE FENDERS ARE CRACKED IN SPOTS AROUND THE RACKS. IT HAS 27X12X12 TRI CLAWS ON BACK AND 27X9X12 BI CLAWS ON FRONT. IT HAS A 2 INCH LIFT ON IT. IT HAS A WARN WINCH. THE PREVIOUS OWNER SAID THE WINCH NEEDS A CONTACTOR. I HAVE NOT TRIED TO REPAIR THE WINCH. MECHANICALLY THIS BIKE IS IN GOOD SHAPE. PHYSICALLY, THIS BIKE IS A LITTLE ROUGH AROUND THE EDGES. I AM WILLING TO MEET SOMEONE HALF WAY, UP TO 75 MILES, FOR DELIVERY. IF YOU HAVE ANY QUESTIONS PLEASE GIVE ME A CALL