1976 Honda CB

Please read the entire auction about this one of a kind bike!! Picture heavy too, let them all load!! 1976 CB750K built by Lossa Engineering, "F" model tank, motor was re sealed with ALL new gaskets, seals and "o" rings, degreed cam, velocity stacks, rare Maxi-x exhaust, oil pressure gauge, Dyna coils & Taylor 8.8mm red wires, vintage finned side covers & tappet covers ( powder coated gloss black), 530 chain conversion with new front & rear sprockets and a gold DID "o' ring chain, polished then nickle plated frame, aluminum wheel hoops that were nickle plated with black zinc plated stainless steel spokes, rear wheel is 3 1/2" wide with a 140mm wide Pirelli dual sport tire, front rim is a 3" width with a 120 wide tire, front hub is nickle plated, rear hub is powder coated, all hardware was either black zinc plated, nickle plated or replaced with stainless steel, Rare Redwing shocks, dual disc brake conversion with CNC drilled rotors, Nissin master cylinder, brand new fork tubes, vintage flat tracker tail section, custom paint work with gold leafing & red pinstriping by the world famous Harpoon, tinted headlight, leather pleated upholstered seat, tapered head bearing conversion, new swing arm bushings, bear trap pegs, all unnecessary tabs and brackets removed(& center stand), new fork gators and a Tazzo fork brace, aluminum headlight brackets, l.e.d. dual tail light, headlight and tail lights are tinted, headlight has a zenon H-4 bulb conversion(the brightest bulb available), Restored speedo with Lossa's brand gauge face, Modern regulator/ rectifier combo, electronic ignition and the bike was wired completly from scratch, Custom adapted velocity stacks, over 6 hours of carb tuning (so you know this thing IS dialed in), CRG mirror, STM billet bar ends, waterproof ignition, lightening holes drilled everywhere, nickle plated custom 35mm clip ons, . Check here for more info on the bike: Lossa Engineering Currently registered, title in hand!Bike has only about 500 miles on it since it was completed. Bike has won trophy's in several shows, including the Grand National Roadster Show in Pomona CA, where it took first place last year.Bike was also featured on the Cafe Racer TV show on Discovery channels HD Theater, it was test ridden by Jason Lee (the actor, pro skater) and Eric Bostrom (pro AMA superbike rider), a DVD of the episode will be included with the sale of this bike. You can also see it on the front page of their web site with Jason Lee sitting on it. Video courtesy of: It will also be featured in a upcoming issue of Cafe Racer Magazine. NOTE: Please DO NOT ask what the reserve is, this is a "auction" site, not a "for sale" site!!!(hint: it is not that high compared to what I have in it!!) Check here for more info on the bike: Lossa Engineering Check here for more info on the bike: Lossa Engineering On Jan-08-11 at 07:32:23 PST, seller added the following information: Reserve is getting close!!! The bikes rim diameter are 18" in the front and rear. I made the headlight rock guard from scratch, not a store bought item. The front has a dual disc brake conversion, I machined all the components to work and fit properly. Braided stainless front brake lines. Bike has a clean California title in my name, currently registered and insured.