1990 Toyota Tacoma

Pickup truck

4 - Cyl.

Manual

jt4rn81r8l0041744

Clear

Gasoline

hello what we have here is my 1990 toyota pickup, i have been working on this truck slowly over the last 6 years. lets start with the frame and suspension,custom fully boxed frame 2x4 tubing with angled c notch ran under cab all the way to firewall. reversed 4 link bar setup with firestone 2500# bags in rear and 2600# bags in front. all air suspension fittings,bags,valves are 1/2 inch so this is a very quick system. the valves are smc very good valves never had an issue. all line is dot brake line with ts and pressure fittings good to 450 psi. it has a viar 280c compressor mounted upside down under cab it is a 100% duty cycle compressor and rated to 200 psi. it is a four valve setup for front and back or pancake. the motor is a 22r carburated engine runs well, uses no oil, the motor has 140,000 miles it does have a rebuilt ford 9 inch rear end so there is potential for a bigger motor. 4 speed manual transmission shifts well no grinding. 18 inch enkei wheels and low pro 35 series tires with less than 1000 miles on them. 4.5 inch body drop!!!!!!!!! sectioned 2 inches rockers rear roll pan. tailgate smoothed out, frenched license plate box, 59 cadillac taillights frenched in. 99 forerunner front end conversion shaved handles shaved wiper cowl vents. painted honda hybrid green. as far as the interior goes i have got a 59 impala dash sectioned in and ready for mud work. the backbone to the console and rear of cab are close for foam and upholstery. there is a rip in the roll pan about 2inches up on the drivers side not hard to fix and some really light scratches on the pass side fender not very noticeable also the cowl were the vents were has shrunk out. as you can tell the interior needs to be finished up and the headlights and taillights wired in.i have alot of the original interior that will go with the truck as well as a brand new in the box chrome grille, power window kit, and a onboard air compressor that will fill the 5 gallon tank in seconds. like i said this has been an ongoing project of mine and i really hate to let go of such an awsome truck but priorities in life have changed. so here is your chance to own a great looking mini truck with very minimal work left.