1972 International Harvester

p/u Pickup truck

Manual

B43205H255226

Clear

Gasoline

72 international p/u stake bed....it has a 345 motor. nooo knocks no tapping no smoke 4 speed. with 4x4 and snow plows [2]... it has 58000 org miles..i did a title and vin check to be sure it was the org miles and it is the owner and his dad went back and fourth on owner ship. one or the other worked for the town ship that it was used during the winter for plowing... is why the miles are low.... ..... i had to move truck into storage. but now need the room.so my loss your gain.... heres what i know about the truck.....the truck runns good. .. motor runns good 4x4 works. and the snow plow works. heres what the truck needs . the rocker panels. replaced i have them new... gas tank strap needs refasten.. the hood mount needs a plate to mount to.. needs some rear brake work. lines bled. some rust spots on the truck but nothing that cant be fixed. windows are all good no cracks... heater wipers lights work....divers side doughnut gasket needs replaced .. looks like some of fittings like oil pan plug . diff plug and some of the bolts aound 4x4 case need to be tighten..most likely just viberated loose over the years. i got under the truck and turned some of the fittings by finger..... and the tires have good tread hold air. but they do have some dry rot ....... frame is good and the drive train is good..it would be a good truck to either restore or use as a plow truck..... i will put a low reserve on this truck. how ever im not looking to make a profit. just trying to get my money back....the truck is in storage and both plow blades are here at the house.....ohhh it comes with a extra plow setup for a international.brakets pumps and blade.... if the truck meets my reserve. than i will pay the cost of hiring a tow truck to lift both plows onto the the international for trans port.....if the truck does not get the reserve that i posted. and i decide to let the truck go anyways to the highest bidder..than you pay the cost or have some way of loading plows......like i said im not looking to make a profit. just trying to get back most if not all what i paid for.... the reserve will be low.......thank you........... if the the bidds reaches the amount i gave for the truck...... that person with that bid will be contacted. . i will only stop the bidding when i have cash in my hand. sooo theres plenty of time for you to make arrangments to come look at it and buy it.....transport it... im just trying to be fair.. it was a good buy for me for what i gave for it.... just so happens i need the storage more so now then b-4 On Jun-20-10 at 01:51:00 PDT, seller added the following information: i will accept check if your from out of town....the check must clear.before i release the truck.....and remember please leave room when you place your bid. if the bidds fall short of the reserve...i decide to let the truck go anyways..for the cost of having th e plows loaded up..im sure i can most likely find someone to lift those plows to do this iether phone book or online for 50 or 60..unless you have the means to do soo..... keep that in mind...... thank youOn Jun-21-10 at 14:58:30 PDT, seller added the following information:i have had some asking what model...... i just went over and looked on the door tag says its a 1210 4x4 i hope this helps..... also i have been up in the as to let the truck go if it did not reach the reserve... so im going to remove the reserve so you will know that you not bidding for nothing..... i will say this the reserve i posted was less than what i gave.. but how ever i dont think the bidding is going to make it there. and i need the storage space.if it does reach the reserve i had posted i will still cover the cost of slinging the blades....but i dont think it will so be prepared to have the means of loading them.... good luck.On Jun-24-10 at 17:27:09 PDT, seller added the following information: ok..guys some had asked about the floor pan and cab mounts........ i just came back from looking tried to take pics but it was to dark inside . they did not turn out....... heres what i seen..... the floor pans them self dont look bad. theres a small hole about the width of match stick on drivers side .i crawled inderneath to get a look i see no holes in the floor... there is alot of dirt and road grime ...... the cab mounts them self look solid.. two in the front mounted to floor. from the best i could tell look ok.the passanger rear i could not see due to the fuel tank blocking it.... the drivers rear pan b-4 the mount meets..... has rust. i dont think it would take a whole lot to straighten that part out.......... i hope this helps......good luck