1964 Honda CA

CA95-4XXXXXX

Clear

UP FOR BID IS A CUSTOM BUILT 1964 HONDA CA95 BENLY DREAM. THIS BIKE IS A MILITARY THEME BIKE. THIS BIKE WAS A HOBBY BUILD. ALL SHEET METAL WAS SAND BLASTED AND PHOSPHATED THE ENGINE WAS DISASSEMBLED. ALL ALUMINUM PARTS AS WELL AS THE CAST IRON CYLINDERS WERE BEAD BLASTED. SHEET METAL PAINT IS SYNTHETIC ENAMEL MILITARY DRAB GREEN. ENGINE & MUFFLER PAINT IS CERAMIC BLACK TWO PART (EASTWOOD) WHEELS WERE BEAD BLASTED BEFORE BEING PAINTED . TUBE SIDE WAS PAINTED WITH TWO PART ENAMEL. THE BIKE HAS NEW TIRES, TUBES, SEALS AND GASKETS. ALL BEARINGS ARE CLEAN AND REPACKED WITH HIGH END GREASE. THE ENGINE HAS NEW RINGS, HONED CYLINDERS, LAPPED VALVE SEATS, REBUILT CARB AND CUSTOM AIR CLEANER. WIRING IS CLEAN WITH NEW CONTACTS. CUSTOM"READY FOR DUTY" TANK EMBLEMS THIS ONE OF A KIND BIKE ALSO SPORTS A HARD MOUNTED LEATHER COVERED SOLO SEAT AND CUSTOM FIT AMMO BAGS AND TURN SIGNALS STANDARD BULB FRONTS AND LED REARS! NOTE: LOW BEAM IN THE HEADLIGHT IS OUT. THERE IS NO WARRANTY ON THIS BIKE. THE WINNING BIDDER UNDERSTANDS AND ACCEPTS THE RISKS AND POSSIBLE INJURY THAT MAY OCCUR WHEN RIDING MOTORCYCLES. THIS IS A 51 YEAR OLD BIKE. NO RETURNS A BILL OF SALE WILL BE ISSUED. PAYPAL DEPOSIT OF $250 WITHIN 24HRS OF THE WINNING BID IS REQUIRED. CASH OR CERTIFIED CHECK FOR THE BALANCE. THE BIKE WILL NOT BE RELEASED UNTIL FUNDS CLEAR IF PAID BY CERTIFIED CHECK. ABSOLUTLY NO INTERNATIONAL BIDS WILL BE ACCEPTED. NON USA ADDRESS BIDS WILL BE CANCELED. PLEASE NOTE! BIDDERS WITH LESS THAN 5(FIVE) FEEDBACKS WILL HAVE THEIR BIDS CANCELED. IF YOU HAVE LES THAN 5 FEEDBACKS AND WANT TO BID, PLEASE CONTACT ME FIRST. SHIPPING IS THE RESPONSBILITY OF THE BUYER. MY ZIP IS 30467. I WILL ASSIST LOADING THE BIKE. THE BIKE WEIGHS ABOUT 285 LBS. QUESTIONS WELCOME! GOOD LUCK AND THANKS FOR LOOKING! On Sep-06-15 at 04:01:09 PDT, seller added the following information: Feel free to view my youtube video about the bike. The ride around the property is in first gear as I was holding my iPhone and could not shift through the gears. https://www.youtube.com/watch?v=Z79BuxBZEq8 On Sep-06-15 at 07:40:38 PDT, seller added the following information: I wanted to add additional information about the gas tank. The gas tank was cleaned and de rusted. Small pin holes were silver soldered. The tank was tested after being soldered and proved fuel tight. Just to make sure the tank was going to be fuel tight going forward, I coated the inside with POR x 3 applications. In addition I fiber glassed the bottom. Prior to coating the inside of the tank, I had a 3/8 petcock bung welded into the tank and installed a new 3/8 petcock. The fuel line is double wall. The tank bottom was finished prior to painting. The tank is primed with automotive two part primer before being painted with synthetic drab green enamel. The winning bidder will get at least a pint drab green paint for touch up.