1964 Honda CA

CA95-4XXXXXX

Clear

UP FOR BID IS A CUSTOM BUILT 1964 HONDA CA95 BENLY DREAM. THIS BIKE IS MILITARY THEME BIKE. THIS BIKE TOOK 25 MONTHS TO BUILD. ALL SHEET METAL WAS SAND BLASTED AND PHOSPHATED THE ENGINE WAS DISASSEMBLED. ALL ALUMINUM PARTS AS WELL AS THE CAST IRON CYLINDERS WERE BEAD BLASTED. SHEET METAL PAINT IS SYNTHETIC ENAMEL MILITARY DRAB GREEN. ENGINE & MUFFLER PAINT IS CERAMIC BLACK TWO PART (EASTWOOD) WHEELS WERE BEAD BLASTED. TUBE SIDE WAS PAINTED WITH TWO PART ENAMEL. THE BIKE HAS NEW TIRES, TUBES, SEALS AND GASKETS. ALL BEARINGS WERE ULTRASONIC CLEANED AND HAVE NEW HIGH END GREASE INSTALLED. THE ENGINE HAS NEW RINGS, HONED CYLINDERS, LAPPED VALVE SEATS. REBUILT CARB. CUSTOM AIR CLEANER. CLEAN WIRING AND CONTACTS. CUSTOM"READY FOR DUTY" TANK EMBLEMS THIS ONE OF A KIND BIKE ALSO SPORTS A HARD MOUNTED LEATHER COVERED SOLO SEAT AND CUSTOM FIT AMMO BAGS AND TURN SIGNALS STANDARD BULB FRONTS AND LED REARS! NOTE: LOW BEAM IN THE HEADLIGHT IS OUT. THE BIKE WAS BUILT WITH A BLEND OF NEW AND USED PARTS. EVERY USED PART WAS CLEANED. SOME PARTS LIKE THE MUFFLERS AND CARB CLAMS WAS REPAIRED. CABLES AND ALL MOVING SURFACES ARE LUBRICATED. THERE ARE MANY CREATIVE IDEAS ENGINEREED INTO THIS BUILD. THE ENTIRE BUILD STORY WAS DOCUMENTED IN FOURWHEELFORUM.COM http://www.fourwheelforum.com/showthread.php?t=2062 NEARLY 9200 PEOPLE HAVE FOLLOWED OR READ ABOUT THIS BIKE! THERE IS NO WARRANTY ON THIS BIKE. THE WINNING BIDDER UNDERSTANDS AND ACCEPTS THE RISKS AND POSSIBLE INJURY THAT MAY OCCUR WHEN RIDING MOTORCYCLES. THIS IS A 51 YEAR OLD BIKE. PAYPAL DEPOSIT OF $250 WITHIN 24HRS OF THE WINNING BID IS REQUIRED. CASH OR CERTIFIED CHECK FOR THE BALANCE. THE BIKE WILL NOT BE RELEASED UNTIL FUNDS CLEAR IF PAID BY CERTIFIED CHECK. ABSOLUTLY NO INTERNATIONAL BIDS WILL BE ACCEPTED. I WILL CANCEL ANY AND ALL INTERNATIONAL BIDS. SHIPPING IS THE RESPONSBILITY OF THE BUYER. MY ZIP IS 30467. I WILL ASSIST LOADING THE BIKE. GOOD LUCK AND THANKS FOR LOOKING! On Sep-06-15 at 04:01:09 PDT, seller added the following information: Feel free to view my youtube video about the bike. The ride around the property is in first gear as I was holding my iPhone and could not shift through the gears. https://www.youtube.com/watch?v=Z79BuxBZEq8On Sep-06-15 at 07:40:38 PDT, seller added the following information: I wanted to add additional information about the gas tank. The gas tank was cleaned and de rusted. Small pin holes were silver soldered. The tank was tested after being soldered and proved fuel tight. Just to make sure the tank was going to be fuel tight going forward, I coated the inside with POR x 3 applications. In addition I fiber glassed the bottom. Prior to coating the inside of the tank, I had a 3/8 petcock bung welded into the tank and installed a new 3/8 petcock. The fuel line is double wall. The tank bottom was finished prior to painting. The tank is primed with automotive two part primer before being painted with synthetic drab green enamel. The winning bidder will get at least a pint drab green paint for touch up.