1989 Ford Mustang

None

1FABP40A5KF269802

Clear

1989 Ford Mustang Roller Project (No motor, transmission or hood). Originally a 4cyc. but started to convert it to a 5.0. It is also set up for a 5spd. The coupe had the following parts transferred from a 92 5.0 LX Conv.: · Brakes – all 5.0 brake lines, brake booster, master cylinder, spindles, rotors and calipers · Drive-train- 8.8 rearend with 3.27 factory installed gears, quad shocks & brackets, remanufactured 5.0 steering rack with new bushings, front sway bar with new poly bushings, rear sway bar · A/C – condenser, dryer, lines · Fuel- EFI fuel lines from tank to fuel rails, gas tank · Misc – exhaust brackets, throttle cable, max speed lowering springs, vacuum tree, under fender vacuum canisters, flowmaster catback exhaust It has a 5.0 headlight harness on it with the correct alternator harness for a 5.0. Body is pretty straight with a some small dents and dings here and there, the paint is coming off the front bumper, the previous owner stored the transmission on the roof of the car so it has dents in. The black plastic cowl needs to be replaced, it is cracked. The passenger side door is from another car. The power windows work but the power door locks do not. Interior is blue in decent condition, the radio is in it but not hooked up, tires have decent tread, No motor, transmission or hood ( I do have a 2" steel cowl hood that can be purchased by the buyer for additional money if interested). This is a project car and a roller meaning no motor or transmission. It will need to be towed away within 7 days of end of auction. Sold as is. Clean title in my name. Email any questions or if you want to set up a time to come by and look at it. If you want additional pictures of a particular part of the car let me know and I will take them and send them if I can.