1987 Chevrolet C/K Pickup 1500

Standard Cab Pickup

350 TBI

Automatic

1GCEV14K4HS186859

Clear

Gasoline

I went through the body in 2015-16. Installed new rocker panels, bed sides, bed front, tailgate, right front fender and right door, front bumper, and tires. Brake pads and rear shoes were replaced. I had the seat recovered, lined the cab floor and lower cab rear panel with sound deadening liner, and installed a new mat and a padded dash cover. I had a new dual exhaust system installed with Magna Flow mufflers. New back cab glass and windshield with new seals. Stewart Warner manual oil pressure and temperature gauges. Cigarette lighter was replaced by a usb charger. I finished it in March, 2016. Had a tonneau cover installed later that year. In February 2017 I replaced the engine with a new crate motor. My goal was to get the truck in top shape and use it on a limited basis as a driver. It is not show quality, my paint has some orange peel in it but is smooth to the touch. There are a few body dings. Also bed floor and left rear fender well have several dents which I painted over. I have a bed mat in it currently. The truck is complete and is in shape to keep for a long time. I have driven it around 4000 miles after installing the new motor. Drives and handles nice. Truck is available for inspection at Cisne, Illinois. On Feb-06-19 at 17:04:34 PST, seller added the following information: I have been asked questions concerning vehicle and wanted to add more information. Over the last two years, I have replaced the transfer case tail shaft seal, front ball joints, driver's side front axle u joint and bearings, emergency brake cable, door pins and bushings, and cab mounts. Basically if something needed fixing I fixed it. I have not had any problems with the drive line. The rocker panel work included inner and outer panels.