1939 Ford Other

Sedan

355/380 hp

Automatic

Clear

This is a running driving hot rod project. Headlights, taillights and turn signals work. It handles excellent in town as well as on the highway at over 90 MPH!! I'v driven it with 2 fingers this fast!Does need wipers and horn to pass state inspection, but I do have MG wiper parts that come with the car. I have 40 Ford Quarter trim, two upper hood trim pieces, and some stock interior door handles. But that's all the trim I have. All steel body and fenders, new floors (not replace from original rusted, the previous owner cut out a pretty solid original floor). Trans tunnel was rolled and flanged, then plug welded. 16 Gauge.Fully boxed original frame with 1x2 center sectionChassis Engineering rear springs, rear sway bar, and front sway bar.Dropped 46" Super Bell axle, with POSIE spring, Pete and Jake shocksWilwood disc front brakesSplit 40 Ford wishbones9" Ford rear end narrowed to 54", 3.70:1 Richmond gears.15x6 Halibrands front (185/60)15x8 Halibrands rear (narrowed from 15x10 by Eric Vaughn 235/70)350 (.030 over bore) 485 lift cam, 9.5:1 compression ratio, completely new200r4 4 speed over drive trans, completely rebuilt with 2200 stahl convertorLimeworks polished steering column, dash modified for two 3 3/8" Classic 4 in 1 Gauge and Speedo (Speedo has 17 miles on it, car has around 2000 miles)Lokar shifterClassic Gauges/Pete and Jakes logo. They are 3 3/8" (two) one is the spedo, the other a 4-n-1 (temp, fuel,oil, volts)Limeworks roadster column, with 39 Ford 4" polished drop, 4 spoke (Limeworks) drilled wheelVega Steering box.Sanderson block huggers headers with mandrel bent, custom fabricated 2 1/2" exhaust.Flowmaster typer mufflersNO GLASS INSTALLED BUT HAVE REGULATORS AND GARNISH MOLDINGS HAVE BEEN BLASTED AND SEALED :-)Body was sandblasted and sealed with DuPont sealer with bodywork over sealer.Stock 39 Dash has had ash trays, clock filled, but retains stock top trim hole, and glove box lock. Dash has been body worked and is very close to paint ready.Main trim holes along side of body and hood center trim retained (I have some stock 40 sedan trim, but was going to go with 39 trim)Virginia titlePlease contact me if I can answer any questions!!!(502) 419-7674