1958 Chevrolet Other Pickups

Apache Pickup

350 V8

3A58K118412

Clear

For Sale: 1958 Chevrolet Pickup with a TON of new parts! Father-Son Chevy Truck Restoration Project! Restoration Started. I have spent over $10,000 in accumulating parts and costs in building the engine for this. The Engine: Chevrolet 350 V8– Had the block hot tanked and magnafluxed. Cylinders honed Heads were completely re-done – shaved and magnafluxed, new valve guides and reassembled. All machine work done professionally. Engine built at local hot rod shop. New Flat Top Pistons. Medium cam – the shop that built it told me that it will have a great sounding idle but still be drivable. They let me take photos of the rebuild process. All new bearings New crankshaft New Endurashine intake manifold New chrome valve covers with Red “Chevrolet” and Bow Tie. I also have a set of chrome valve covers without the red Chevrolet and Bow Tie HEI Distributor (I actually have two HEI distributors – new in box) Zoom timing chain Chrome timing cover Engine was painted Red. I’ve paid well over $1,200 for all the parts and labor having all the machine work done and the complete rebuild. The Truck: Here’s the work done on the truck itself so far: 1958 Chevrolet Pickup ½ ton Stepside Installed a 1978 Camaro Rear Axle. Installed a Disc Brake kit in the front. Installed a Corvette Dual Master Cylinder – much better braking! I can confirm that the axle and braking system worked great before disassembly. Once it was all disassembled, the frame was wire wheeled and painted gloss black. Removed the stock power steering box and welded on a custom power steering box. Not sure what it’s from, but it came off of a wrecked hot rod 55 Chevy pickup. I have all the linkage to make it work too. The guy I hired did a good job getting it measured and welded on. Welded in inner and outer cab corner. Also welded in a repair plate over the radio, but I also have an additional replacement 350 Transmission – I drove the truck around before I took it all apart. It drove and shifted well. I don’t know anything else about it. Had the body removed from the frame – had it sandblasted. This showed the areas in need of work. Sandblasting bares it ALL! I also had the bed and tailgate sandblasted. Cab was painted over with a coat of NAPA primer that cost over $100 a gallon. It's all been primed and protected from flash rust. Had the fenders sand blasted, too! Purchased a new steel right front fender. Three doors – after we had the truck sandblasted, one of the doors (which originally looked fine) had a bad patch job at the bottom of it that we weren’t aware of. I bought a replacement door, but kept both. I have all the glass for this except for the windshield. I bought a stock bench seat for it that needs rebuilding – have purchased a rebuilding kit. There are 4 matching wheels. The plan was to paint the wheels red and clip on the baby moons and chrome trim rings. I have accumulated so many parts over the years. I’m sure that I am forgetting something. There is a big list below. Here’s what you’ll need: Cab patches will have to be welded in. Some general bodywork on the doors and fenders, and put it all back together! Most of the parts are THERE! I believe I have every single patch panel they make for this cab. I’ll list it all below. Also have lots of used parts, including extra emblems, extra gauge clusters, and a TON of other used parts for this truck!! There is a more exact list of the new parts I purchased. Lots of engine parts and tons of chrome. I have two HEI distributors. A larger list is below. I took pictures of the entire process – I will include a picture of what the truck looked like before I took it all apart. This should make someone a GREAT project. I can see this as a great father-son project. Winner of this auction gets: ALL the listed new parts (over $5,000 alone) ALL the extra used parts I have acquired (gauges, emblems, heater box, interior parts, body parts, etc.) The freshly built 350 Chevy V8 engine The 350 transmission The 1958 Chevrolet Pickup and all its original parts It will obviously have to be trailered. I am happy to work with the buyer to help coordinate pickup and even a possible delivery within a reasonable distance. Truck and all parts are located in Godfrey, Illinois – about 45 min north of St. Louis. Buyer will have 14 days to coordinate pickup. The truck has a Clear Title I have described this truck and its parts to the best of my ability. This vehicle is being sold as-is without warranty.Buyer must pay full amount with certified cashier's check within 10 days of auction's close -- Truck must be paid in full before the buyer picks it up. If you do the buy-it-now, I would be willing to help coordinate a pick-up before Christmas! NEW PARTS LIST: (This does not include all the used parts) Distributor, SBC, Blueprinted HEI, #910-12342 $99.99 Valve Cover Set Chrome Stamped Steel, Tall Valve Cover with Black Lettering & Red Chevy Bow Tie Emblem - GM Performance Parts $76.95 Headers, SBC, Extra-Thick Flange, Ceramic $174.00 Another new Chrome Tall Valve Cover Set Smooth $34.00 Intake Manifold -- SBC, Endurashine Polished Finish (on engine) $189.99 Wire Loom, Chrome, Smooth Finish $58.95 Timing Tab, Chrome, SBC, 8" HB, Part # 5A09F2 $4.99 Timing Chain Cover, SBC, Chrome $11.99 Alternator, Chevrolet, Chrome, Red Bowtie $129.99 Compact Chrome Starter Motor, Chevy 350 $189.99 Pulley, Chrome, SBC, Crankshaft $32.99 Pulley, Chrome, SBC, Crankshaft Single $29.99 Pulley, Chrome, SBC Short Water Pump, Double $34.99 Alternator Bracket Kit #5170, Mr. Gasket $25.00 Coolant Overflow Tank -- Chrome $45.99 Bolt Set, Chrome, SBC Valve Covers GM Performance Parts $10.99 Air Cleaner Wingnut, Chevrolet Emblem, Black & Red GM Performance Parts $9.99 Oil Pan Bolts, Chrome $4.99 Transmission Cooler, Brushed Finned Aluminum $58.99 Fuel Pump Plate, Chrome with Gasket, SBC $8.99 Carburetor Feed Line, Steel, Chrome, Fits Carter, Edelbrock $15.99 Water Neck, Chrome, SBC, Angle w/ bolts $29.99 5/16" Blue LED Light (911-31054-BLU) Speedway $4.99 10 Insulated Line Clamps (910-31312-3/8) Speedway $4.99 10 Insulated Line Clamps (910-31312-1/4) Speedway $4.99 Full light switch with Dimmer and Pedal switch. The pull is Chromed Aluminum (WA8502C) $19.95 Chromed Aluminum Pedal Pad $31.95 Chrome Gas Pedal $59.99 Chrome Rear View Mirror (WA8265) $39.99 Universal Braided Steel Throttle Cable (TC-1000HT) $46.99 Chrome Throttle Bracket $9.99 Chrome Horn Set by Mr. Roadster (PAIR) $29.99 UltraTouch Natural Cotton Radiant Barrier, 24 Sq. Ft., Sound Proofing $29.95 Quick Disconnect Harness for Mini Starter $14.99 Timing Chain Set, SBC, Zoom Performance (on engine) $29.99 Oil Pump Stud Kit, Chevy V8, 230-7003 (on engine) $12.95 Oil Pump, SBC, High Volume, M-55HV (on engine) $35.95 Spark Plug Wires, Taylor, Pro Series Performance, 8mm, Pro-Resistor,90-degree, RED $54.99 Seat Belt, Standard Lap Belt $19.95 Seat Belt, Standard Lap Belt $19.95 Flex Plate Bolts, Mr. Gasket $5.95 Carburetor Stud Kit, 1 3/8" $3.99 Fuel Pressure Gauge, Auto Meter, #2175 $35.99 Harmonic Balancer, SBC, Black (on engine) $59.99 Motor Mount set, SBC, #542-62500 Made by Safety Racing $24.99 Harmonic Balancer Bolt Kit, SBC $7.95 Tin Sign, Rectangular, Man Cave, 18 in. Width, 5.50 in. Height $18.99 Fan Blade, Heavy Duty, Steel, Series 1000, 17" steel rigid race fan made by Derale Cooling $29.95 Aluminum Fan Spacer with Bolts, 1/2 inch $12.99 Aluminum Fan Spacer with Bolts, 1 inch $12.99 Aluminum Fan Spacer with Bolts, 1 1/2 inches $12.99 Heater Hose Fitting, 5/8" $3.95 Water Pump, SBC, Long $58.99 Break-In Oil, "Comp Cams" 1 quart $9.95 Spark Plugs, Pack of 4, RV15YC4 $12.00 Spark Plugs, Pack of 4, RV15YC4 $12.00 Muffler, Glasspack, POLISHED STAINLESS, 2.25 in, 2.25 out, 25" long bought from THRUSH $99.95 Muffler, Glasspack, POLISHED STAINLESS, 2.25 in, 2.25 out, 25" long bought from THRUSH $99.95 Muffler, Glasspack "Red Hots:" $24.99 Muffler, Glasspack "Red Hots:" $24.99 Distributor, SBC, Blueprinted HEI, #910-12342 $99.99 LMC Chrome Bumper new in box (LMC) $190.00 Bench Seat Rebuild kit new in box (LMC) $40.00 Front roof visor new in box (LMC) $165.00 Stainless Steel Bumper Bolts new in box (LMC) $17.00 Lower Grill Panel new in box (LMC) $100.00 Gloss Black Valve Cover Bolts (Willie's speed shop) $5.50 Floor Pan (Patch Panel) (LMC) $130.00 Door Sill with Rocker Left Side (Patch Panel) (LMC) $70.00 Door Sill with Rocker Right Side (Patch Panel) (LMC) $70.00 Outside Cowl Panel Left (Patch Panel) (LMC) $100.00 Outside Cowl Panel Right (Patch Panel) (LMC) $100.00 Step Support Left (Patch Panel) (LMC) $20.00 Step Support Right (Patch Panel) (LMC) $20.00 Cab Mount Left (Patch Panel) (LMC) $40.00 Cab Mount Right (Patch Panel) (LMC) $40.00 Door Pillar Left (Patch Panel) (LMC) $40.00 Door Pillar Right (Patch Panel) (LMC) $40.00 Pillar Inner Pocket Left (Patch Panel) (LMC) $40.00 Pillar Inner Pocket Right (Patch Panel) (LMC) $40.00 Hinge Pillar Pocket Outside Left (Patch Panel) (LMC) $30.00 Hinge Pillar Pocket Outside Right (Patch Panel) (LMC) $30.00 Front Firewall (LMC) $380.00 Windshield Seal (LMC) $28.00 Back Window Seal (LMC) $25.00 Chrome Double Headlight Trim Rings (LMC) $120.00 Parking Light/Turn Signal bezel SET Chrome (LMC) $45.00 Window Roller SET Chrome (LMC) $20.00 Outside Door Handle SET Chrome (LMC) $40.00 Inside Door Handle SET Chrome (LMC) $20.00 LED Taillight with Chrome Housing (LMC) $50.00 Fuel Pump (LMC) $50.00 Dash Repair Panel for Radio (Patch Panel) (LMC) $40.00 Front Fender (LMC) $460.00 Speedway Wiring Harness $120.00 TOTAL in NEW PARTS $5,051.31