1973 Chevrolet C/K Pickup 1500

383

TH400

CCQ143Z164558

Clear

i have for sale a beautiful 1973 chevy stepsdide. about 4300 miles since the motor was built i am ready to start a new project but need to sell this truck first. its a blast to drive and gets lots of looks and compliments. i have over 16000 into this truck. i took it to the drag strip a couple times only and ran a 12.69 at 107mph the body-body and paint 8/10new gm tailgate, front fendershas no dents but a few small scratches (nothing noticable 5 feet away)a couple spots where the body work shows or the paint is cracked (small)the paint is a slick looking BMW silver and still looks new, its about 3 1/2 years oldthe bed rail stake pockets were smoothed out and the rear sidemarkers removedits not perfect but honestly looks perfect unless you get up close and pick it apart the engine/ transmission-makes about 500hp without the nitrousi have spent about 7000 on the motor and transmissionits a 1971 high nickel block .030 over 383 stroker with scat crank, forged 6.0 rods, and forged keith black pistons10:1 compression ratiolunati voodoo cam .505/.528 lift 276/284 durationcomp ultra pro 1.52 rocker armspatriot 2.08/2.02 222cc aluminum heads weiand team g intakeholley 780 carbfull msd ignition 6al2 ignition box, pro billet distributorhedman ceramic heeaders full 3 inch exhaust with flowmasters and h pipe and exhaust cutoutsNOS wet shot nitrous, 150 shot plate injection, 10 lb bottle mounted in bed the interior-all new or new upholsteredcustom (done right) center console with shifter and gauges built in and storagebillet steering wheel, trim kit, and all accessories are basically billet aluminumhigh back bucket seatstinted windowspioneer deck with kenwood speakers in boxes behind the seats the rest-beautiful ash homemade wood bed. it looks like fine furniture! (my dad is a great woodworker)billet grillnew lights all around the tires are toyo proxes 4 275/60/15 on corvette ralleys with a pair of M/T et streets on matching wheels if i forgot something let me know and we can get in contact and i can get you pictures or whatever. thanks and good luck bidding!!! On Sep-30-12 at 16:53:40 PDT, seller added the following information: runs great could be fine tuned a little more and you can hear slight piston slap when its cold only. machine shop that built the bottom end bored the cylinders so it would have more power and says its not a bad thing and it goes away after a minute. just wanted to add that so the buyer wouldnt worry. :)On Oct-01-12 at 23:57:03 PDT, seller added the following information: please let me know if you have any questions! i will be as honest as possible