1973 Dodge Challenger

V8

Automatic

JH23G3B102418

Clear

1973 Dodge Challenger ~ Excellent Project!... I had originally found this Challenger a few years back as only the body, which at that time included just a few boxes of parts ...after the previous owner had decided to take the car apart, and just leave it at that. This was a running, driving Car before it was disassembled - but the engine and transmission had long since gone to something else. The car has since been reassembled, with parts that came along with - and also the many parts acquired, since ...Though, (and mainly now due to having my own business) just never seem to have found the time to complete. So, finally decided about time to let the Chally go to a new home ...for another MoPaR enthusiast to now complete, and enjoy! This Challenger originally came equipped from the factory with, (see fender tag decode for more detail) a 318cu 2 bbl.- coupled with a column shift Auto Trans. ...and the body was finished in Honey Gold, complimented with a White Stripe, White Vinyl Roof and Black Interior. The car is now close to 90% assembled, (less drivetrain, etc.) and rolling. Since my purchasing the Challenger, many more parts have been collected along the way which are all included in this Auction, (see pics) ...which will hopefully help the winning bidder to build it, "their way" (R/T - Rallye, or T/A clone?) Condition... The Challenger's body is overall in very good condition, with replacement rear quarter panels that seem to have been installed at some point during recent past, which since that time show a small amount of the usual bubbling at the bottom in places, but should be an easy repair. There was some filler used here and there, (mainly to the lower quarters, etc.) along with the usual fill to where the quarters join the roof, (see pics) as well as some in the front Fenders from previous light damage, etc. (basically the previous filler/finishing job was not done well on the car at all!) but all panels on the car were well fitted - and those places that need attention should be easily reparable. It was also found that the passenger side Fender had originally came from a '70-'71 Challenger, which had been previously, "filled" so as to accommodate the '72-'74 side marker. The driver's side Fender is in what appears to be very good condition, and looks to have come from a '72-'74 Rallye Challenger - as holes for the Fender Gills are already in place. The Doors including the Trunk Lid are all in very good condition, along with fully functioning door and quarter window winders/locks, etc. The Door's Racing Mirrors are in great condition - with full working remote adjustment on the driver's side. The Challenger’s roof also appears in very good, and undamaged condition. Windows are Tinted, all in great condition - and the Windshield includes the original factory yellow sunshade tint to the top. The chassis overall appears to be in very good, solid condition - The only area noticed that will require some attention is on the passenger side rear ...where the chassis just begins to rise up over the rear axel, (see pic) but should be an easy welding fix. The rear shock absorbers are Air Adjustable, with a valve centrally mounted within the trunk The rest of the Challenger's under body, including the firewall and front/rear inner wheel arches also appear overall to be in good condition. The driver's side front floor pan has a small hole near the main drain plug, and the driver’s rear floor pan has some small perforations near the center by the drive shaft tunnel ...But, new driver’s side front and rear floor pans previously purchased from Year One are included. Also, the Trunk floor pan will need replacement, (see pic) and again, previously purchased new Trunk floor pans from Year One are also included. The Electrical Wiring Loom both inside, under the car and also within the Challenger's engine bay is all in place - appears complete and in good condition, with connectors, etc. all in tact. The dash gauge cluster is missing - but these are of course often found available on eBay, etc. The original Dash pad has a few splits, but a brand new quality dash cover is included. The Headliner, Sun Visors, Door panels and center console, etc. - are all in very good condition. The front seats are also in very good condition, (though, these are actually not original to the Challenger) and the seat tilt/adjust mechanisms are all in fine working order. The back seat is in good condition though somewhat brittle, (some tearing in the fabric) - but also included in this auction are a full set of front and back, (see pics) fully lined/padded Challenger seat coverings. All rubber door/trunk seals, etc. are there - and also included are some brand new door window and quarter window strips. ...Thank you for viewing my Auction! ...and of course, should you have any questions at all - then please do feel free to let me know! ...Note: This Car is registered in the State Of Georgia, and as such this State does not require Titles for vehicles older than 1983 ....Please check on your local State's requirements relative to vehicle registration, etc. This vehicle does have clear history, and the Car will come with a copy of the original purchase receipt, (as being proof of current ownership) as well as new Bill Of Sale - which will of course all be provided to the new owner. ...Also, this Car is being relisted - due to a bidder who had no intention of paying, (has been reported) my sincere apologies to all those who so unfairly missed out last time because of this ....Please, serious enquirers/bids *only*- Many Thanks! Fender Tag (Decoded) Code DescriptionE44 - 318-2 BarrelD34 - TorqueFlite Automatic Transmission JH23 J = Dodge ChallengerH = Price Class High23 = 2 Door Hardtop G3B G = 318 150HP(net) or 170HP(net) 1-2BBL 8 CYL3 = 1973B = Dodge Main, Hamtramck, MI, USA 10**** Sequence Number '10****' JY3 Paint Code: Honey GoldA6XW - Trim Grade/Style/ColorA = A Class6 = Vinyl Bucket SeatsX = Black 000 Upper Door Frame: Full Door Panel808 Date Built: 8 / 08 / 197210**** Order Number: 10****V1W Roof Type OR Color: Full Vinyl Top - WhiteU Built to Specifications for USA OrderB41 Front Disc Brakes PowerC56 Bucket SeatsG35 Delete Standard Outside MirrorH51 Single Air /w HeaterL31 Hood / Fender Mount Turn SignalM21 Roof Drip Rail MoldingR11 Music Master Radio AMV7W Accent Stripes - White26 26 in. RadiatorEN2 End of Codes Assembly Line 2 Extra Parts Included (not currently fitted to car...)New Rear Valance - From Year OneNew Driver’s Side Front Floor Pan - From Year OneNew Driver’s Side Rear Floor Pan - From Year OneNew Trunk Floor Pans - From Year OneNew Trunk Fuel Tank Mount Braces - From Year One (2of)Manual/Floor Shift Steering Column - fitted with a very rare, “Tuff Wheel” (pic not shown)Drive Shaft (Rebuilt W/Needle Bearings, etc. - by Drive Shaft Services)Challenger Ram Air Hood - Complete W/Ram Inserts (needs repair but solid, see pics)Extra Hood Springs (2)Trunk Spare Wheel MountChallenger R/T Tail Pipes (2)Rear Tag Lamp AssemblyChallenger Aerial Mast14 inch Rallye Wheels (3)Ralley Wheel Center Caps (4)Extra Rallye Wheel Trims (4)New Door and Quarter Window StripsChallenger Ash Tray assemblySeat Belts (Original, All Working & in Great Condition - Full Set, Front/Rear)Challenger Lined/Padded Seat Coverings (Great Condition & Complete - 2 front - 1 back)Interior Front Pillar Molding (2)Front Kick Panels (1 L/H - 1 RH)Dash Front Speaker GrillDash Headlamp/Wiper/Dimmer Switch Bezel Extra Headlight Bezels (2)Front Valance Turn Signal Assemblies - including Lenses (2)‘72/74 Rear Bumper Over Riders - W/Mounts (2)Fender Mount Side Markers (2)Extra Front Windshield Side Trim (2)Extra Headlight Mounting Rings (4)Protective Door Edge Trims (2)Hood Chrome Front Edge StripChallenger Door Rocker Trim (2)Challenger Radiator ShroudNew Door Locks, (2) and Keys (2)Front and Back, “Challenger” Emblems (2)Back Spoiler and Front Fender, “R/T” Emblems (1 back - 2 front)Rallye Ram Air Hood, “440 Magnum" Emblems (2)Rallye Dash Gauge LenseNew Fuel Tank (Year One)Battery TrayAuto Transmission Mount...I have done my best to describe all I can think of here - and all to the very best of my knowledge, and belief... ...And of course, should have any questions - or require any further information at all, then please do feel free to let me know ...and I will do my very best to help!