1987 Toyota Corolla

AE86 SR5 Other

1.6L 4 Cylinder Gasoline Fuel

Manual

JT2AE86S2H0256304

Gasoline

I am practically giving this one away at this price. Its a 1987 corolla with a strong, turn key, ka24de motor swap that runs and drives good. If you were to build one yourself the cost can easily top 2k, so save yourself the headache and get this turn key swap. Its a good starting point for a drift machine or daily driver as it is. Body is in decent shape with 107k miles, interior is in very nice condition. Interior has no tears, no rips, no cracks on dashboard and the headliner is intact. The body has minor dings, the two major ones are shown in the pics on the fenders. One of the fenders has minor surface rust from exposed metal. Otherwise the body has NO RUST. The grill, hood and headlight housings were replaced from a minor fender bender by the original owner before the swap was even started. This was originally an automatic sr5 converted to the nissan motor swap about 2 weeks ago. Again, the car runs and drives great, its very fast, quick throttle response and effortless acceleration with the light weight, 4.10 gearing combined with the power and torque of the ka24. Not even the 4age's 112hp and 97ft/lbs can compare with the ka24. With proper ecu tuning and other modifications like cams and cam gears, the ka would easily produce a healthy ~180hp with matching torque and still be very dependable and fuel economic. All the gauges work except the rpm and oil pressure. The speedometer works but I'm not sure how accurate it is. It needs an exhaust system, a headlight bulb and one of the tail light bulbs is out. I replaced the front and rear main seals since I was doing the swap and had the motor seperated from the transmission to install the aftermarket clutch. I also removed the egr with a block off plate. Other than that, the motor is untouched. It has heat, no A/C and no Power steering. It would need the ae86 gts powersteering lines and reservoir to have powersteering. A/C addition would require the A/C bracket, compressor and custom A/C lines. The car does have a condensor and air dryer since it originally had A/C. The blower works fine and all the controls are there and working. A CD player AM/FM radio with removable face is also installed and works perfect. The speakers are the factory units so they're really not the best sounding. Includes: Nissan 240sx ka24de s13 engine with 180k miles (replaced the factory 4ac 1.6L 90hp carbuerated engine) Factory nissan efi system including stock ecu and mass air flow sensor Nissan 5 speed manual transmission Centerforce stage 2 clutch In tank s13 240sx electric fuel pump upgrade (supports about 230hp, replaces factory Toyota mechanical fuel pump) Just a few Strong KA24DE (2.4L) Specs:Alumimum Head 16 valvesStrong sleeved Iron blockCam on bucket double overhead camsCrank Girdle (Just like the sr20de and sr20det)Piston Oil squirtersForged crankshaft Does not include: Sportmax Wheels shown are not available. It will come with the factory 13" SR5 wheels and decent tires. Specifications:2 Door Coupe, rear wheel driveApprox 2200 lbs2.4L 155 hp, 160 ft/lbsEngine redline 7200 rpm5 speed manual transmission2 piece balanced driveshaftStock sr5 4.10 rear end open diffFront coilovers (unknown brand)Rear cut oem springs It needs: An Exhaust systemheadlight bulb, tail-light bulbaftermarket rpm gaugeaftermarket air filter I would recommend installing a turbo exhaust manifold to make the exhaust system easier to fabricate. I'm including a used Tanabe muffler with the car. The 13" wheels included come with tires that will need replacement in a few months which probably won't matter if you're gonna upgrade the wheels and tires to a wider width and bigger diameter. Please note that buyer is responsible for meeting the environmental requirements for your state and county otherwise this vehicle is for *off road use only*. *Please check your state and local laws. I reserve the right to end the auction at any time as I have the car for sale locally. Thanks for looking. On Jul-06-11 at 09:07:50 PDT, seller added the following information: I added a manifold yesterday fabricated from a used sr20det manifold I had laying around and a custom 12mm ka24de steel flange. This will make the exhaust system easier to fabricate. I added pics showing the manifold and clearance. I also add a pics of the muffler that would be included with the car.