1985 Chevrolet Other Pickups

K10 Pickup truck

8 - Cyl.

Manual

1GCEK14HXFF367595

Clear

Gasoline

1986 Chevy K10 4X4 Truck was built in 2003, striped down to the bare frame, painted inside and out. New front fenders inside and out, doors, hood, core support, tailgate, custom bumpers to accept winch front and rear, driver side rocker cab corner and floor. Truck has 12” suspension lift and 3” body lift. 39.5” super swamper bogger tires on chrome steel wheels. One spare on a black rim. Engine is a 383 chevy small block built in 03. Everything from the block up is new except for the heads are 2.02 cast iron heads from the late 70’s the rockers and push rods came with the heads. Rotating assembly is all forged from Speedomotive speed shop in California with 6” H beam rods and hypertetic pistons, weight matched and balanced. Edlebrock intake and 750 cfm carb, MSD ignition with 6000rpm rev limiter. Around 10.5 -1 compression ration runs on premium pump gas. Has about 12k on it. Rear end is a 14 bolt with Detroit locker 4.10:1 gears, front is a 10 bolt open differential. Truck comes with a spare transfer case, front axle shafts and spindles. Transmission is a 4spd. Truck is road friendly, the speedometer was re-calibrated so it’s accurate, the steering was all redone to restore the stock geometry. I have about 20k invested, it’s been sitting for 3 years and needs some odds and ends and a good home.