1985 Chevrolet Silverado 1500

K10 Cab & Chassis

V8

Automatic

2GCEK14H2F1110471

Clear

Gasoline

You are viewing my 1985 Silverado 4x4. It was fully loaded from the factory with just about every option. It is a really nice looking truck, especially with the factory two tone paint.The body is solid over all except for some typical Chevy truck bubbling over rear wheels, one spot on front fender and rear bumper and will need rockers, but the rest of the truck, including the underside of the bed, cab floors and cab mounts, is all solid. The truck has a/c, great heat with all new hoses and heater core, power windows, factory installed bed rails, door locks, tilt steering, spray-in bed liner, dual fuel tanks with working switch, and the 700R4 overdrive transmission. The interior is in decent shape for a 33 year old truck, could use new carpet to make it really nice and there is a tear on the factory drivers side of bench seat. All gauges work, even the factory clock! The 4x4 works as well. The truck’s 35”tires, 6” Rough Country lift and shocks are all newer and just had an alignment, it rides down the highway very smoothly even at 60-70mph, with no rattles, shaking, or pulling, especially with the factory dual steering stabilizer shocks. There’s a chrome grille and headlight surrounds that are newer also. There was a $1,500 FiTech fuel injection unit installed on the truck and a brand new hand controller I just ordered, will be included with the sale and enables you to fine tune the fuel injection. The truck starts right up even on freezing cold mornings. This is my daily driver and has never let me down, gets tons of looks. It isn’t perfect, but for being an original 33 year old, accident-free, and true mileage truck, it presents very well. I will include a full sized diamond plate tool box as well. Feel free to email me with any questions. Thanks.On Feb-16-18 at 20:40:37 PST, seller added the following information: * Upon closer inspection only the driver's side rocker would need replacing, the passenger side could use only a small 3 inch by 2 inch wide sheet metal patch.