1980 Chevrolet monza

XXXXXXXXXXXXXX

Clear

YOU ARE BIDDING ON A 1980 CHEVY MONZA .V8 BUILT RIGHT THE FIRST TIME , ON THE ROAD LAST SUMMER ,LOW HRS ON ENGINE AND TRANS , THIS HAS A 355 CUBIC IN ENGINE . IT HAS JEGGS ALUMINUM HEADS. EDEBROCK VICTOR JR INTAKE , TOPPED WITH A HP HOLLY 890CFM. WITH COMP CAM ,ROLLER ROCKERS, FORGED CRANK AND RODS, MSD IGNITION . 1 3/4 HOOKER HEADERS ,ALUMINUM RADIATOR AND WATERPUMP ,FLOWMASTER MUFFLERS WITH 3IN TURN PIPES SET UP WITH ADDITIONAL BAFFELS TO CALM IT DOWN FOR YOUR LOCAL FRIENDS WITH ALL THE LIGHTS ,NEW REBUILT 2 SPEED POWERLIDE TRANS WITH A 3,000 STALL CONVERTER ,IN THR EAR IS A NARROWED 9 IN FOR REAR , WITH 410 POSI GEARS, COIL OVER SHOCKS ,4 LINK SUSPENSION , HAS WELD DRAG LITE RACING WHEELS WITH M&H RACEMSTER TIRES P390/45R15 ON THE REARS ,KUMHO POWERMASTER 165/80/15 ON THE FRONT ,,8PT ROLL CAGE /ALUMINUM RACING SPOILER /STAINLESS FUEL CELL,.AND A LOT MORE TOO MUCH TO LIST , THIS CAR IS NHRA APPROVED ,THIS CAR ON THE SCALE WEIGHS 2638 WITH OUT A DRIVER ,ALSO FULLY LEGAL TO RUN ON THE STREET ,,IT IS TURN KEY ,,READY TO RUN NEEDS NOTHING ,THERE IS OVER $35K AND HUNDREDS OF HRS OF LOVE IN THIS ,DUE TO HEALTH REASONS WE R SELLING A FEW OF OUR TOYS SO PLEASE CK OUR OTHOR AUCTIONS ,, WE R OPEN TO OFFERS ,, BE REALISTIC THOUGH .. THANKS FOR LOOKING ,,,On Feb-10-16 at 19:16:41 PST, seller added the following information: thanku for all interest and all the questions, im sure this will answer most ,cam is a 2,500-6500 rpm 248/248 degree ..525/525 lift ..has 10 1/2 to 1 pistons ,,was on the dyno 512hp at crank at 6,500 rpms , when it was,,built .at that time carb was adjusted and jetted to run on premium pump gas , for the luck bidder all u need to do is turn on the fuel pump wait for the pressure and turn the key ,wait for rumble ,its ready to run that simple ,also rear rims 12 inches wide and tires are 12 1/2 inches wide .fronts are 5in and 5in tires ,also this car was on the race track many times over the years when it had a very slightly modified 400 small block ,always ran in high 9s and very low 10s in the 1/4 mile ,we was hoping to run it this year with this better built engine &new rear racing spoiler and a few othor items ,but it looks like im hoping one of u happy bidders might be doing it for me ,,.,,thanku again and happy bidding ,,On Feb-13-16 at 08:14:38 PST, seller added the following information: HELLO AGAIN ,A LIL MORE UPDATE TO YOUR QUESTIONS ,,THE WHEEL TUBS WILL HANDLE 14 IN WIDE TIRES NO PROBLEM ,,THE AXELS R STRANGE ,,THE BODY IS NEAR PERFECT ,,AND PAINT ALMOST EXCELLENT ,,THERE IS NO RUST SPOTS ,,ON THIS THIS 100PERCENT SOLID CAR , ALSO WE HAVE RECENTLY LISTED THIS LOCALLY SO ,I RESERVE THE RIGHT TO STOP THIS AT ANY TIME ,BEFORE THE RESERVE ,,,ALSO THANKU FOR ALL THE OFFERS I HAVE RECIEVED .BUT FOR U HOT ROD FELLOWS ,,U KNOW THE COST TO BUILD AND BUY ALL THE PARTS JUST TO GET GOING ON THESE PROJECTS ,,,I DONT HAVE A PROBLEM LETTING THIS SET IN MY GARAGE FOR A WHILE TILL THE LAST PAYMENT IS PAID ,AS ITS NOT IN THE WAY TILL MID OR LATE MARCH ,TILL WE START TAKING THE BOATS OUT, THANKU AGAIN ,