1983 Jeep CJ

AMC 360

Manual

1JCCN87E7DT046720

Clear

propane

1983 Jeep CJ7, completely rebuilt from the ground up in 2012. AMC 360 with edlebrock heads, hardland sharp 1.6 roller rockers, edlebrock intake/shorty headers and magnaflow mufflers. Engine has been bored .030 and has a comp cam XE262H with .493 and .500 lift. The jeep cools with a Flex -a-lite dual electric fan set up. Jeep is in amazing condition and has not been offroad since put back together. T-19 transmission, dana 300 t case which has been clocked completely flat with twin stick shifter, Currie dana 44 front and Currie dana 60 rear axle with 4.10 gears and detriot trutracs. The rear driveshaft is a Tom Woods shaft. The frame has been reinforced with M.O.R.E frame plates and I also welded another cross member across the rear of the jeep. The rear brakes are 11 inch drums instead of the normal CJ 10 inch drums. The inside and underneath of the jeep have been sprayed with Line X. Jeep body and frame were painted with PPG primer and PPG paint. All of the running gear has been painted with Rustoleum poducts. Front and rear tube fenders, litedot rear LED tail lights. Jeep sits on 35 inch SSR Super Swamper tires with 5 inch custom ALCAN leaf springs, 1 inch body lift and reverse shackle. Shocks are Rancho 9 way adjustable RS9000XL. Roll cage is tied into frame on the front pillars and seats are mounted to the roll cage. Jeep runs on propane, but making it run on gas is only a matter of putting the tank and a carburetor back on it. I have a 21 gallon fuel tank and a holley 670 truck avenger carb which go with the jeep. This jeep runs, sounds and drives great. I have close to 30 grand in this jeep doing everything myself and I have most of the receits. I do not want to sell it and hate to see it go, but I am moving and no longer have time or room for it. The jeep is sold as seen in the pictures. Any questions please contact me. Thanks for looking.