1987 Dodge Charger

Shelby GLHS Hatchback

4 - Cyl.

Manual

1B3BZ64E2HD571342

Clear

Gasoline

This is GLHS# 582, I have owned the car since early 2008. I have owned the car since 2008, when I purchased it from Georgia. I have put alot of time and money into this car. It runs smooth and is actually very reliable considering its age. I have only needed to replace the battery and the water pump had a slight leak so I also replaced it. The rundown of the car is as follows..... And I almost almost 100% positiveit it has the Mopar Super 60 kit on it. Exterior:-Body is is good condition with some minor scratches, dings. The left fender and ground effect piece has slight damage to it. It is NOT perfect but for being almost 25 years old is in very good condition considering its age. There is slight delamenation on the hood(clear coat peeling). the front lower spoiler also has some stone chips in it. Interior:-Is in good shape seats are a little dirty/stained with it being light grey it shows everything, but it doesn't seem like anything a good steam cleaning wouldn't take care of. Carpet is not the best, could it be cleaned sure but this rare car I think deserves a new one. trim panels for the most part are in decent shape. Some of the trunk interior is out of the car but I have most of it. Engine:- 2.2l 4cyl Turbo. I am not certain on the bottom end if it was ever rebuilt, or if forged internals are in it. Stock they weren't forged but the parts are very common and could have been upgraded. The head also seems to big the "big valve race" head from Mopar, the casting #'s were taken off, and there were specs written in black sharpie on the cam pulley side off the head that have since faded to where you can't read the anymore. Turbocharger:-Like i mentioned earlier about the Super 60 kit, I have never had the turbo off but all off the other pieces to the kit are present. Intercooler:-Treadstone aluminum thick core front mount with the 90 degree elbows welded on to make intercooler piping easier. 2.5" mandrel bent intercooler piping cut and fit by me, I also custom made a Weapon R intake made for an SRT I also cut and welded that to fit custom on this car as you will see in the pics it looks great fits great and works great. Also has a Synapse blow-off valve on it, which doesn't make it faster but it sounds unbelievably neat when it blows off. Transmission:-Stock 525 5 speed Brakes:-SLH 3 mod done. All brake parts are brand new from calipers, brake hoses, brake cables, pads, even the brake lines meaning the steel lines from the master cylinder to the calipers are custom bent new pieces. The rotors are custom drilled/slotted zinc plated so they don't rust. If you don't know what the SLH upgrade is you can google it, but it converts the car to 4 wheel disc on all for corners and it means Stops Like Hell.....and believe me it brakes!! Wheels:-TSW Vortex 17x8 with custom Gorilla locking hubs.And the TSW Hubcentric kit Tires:-Yokohama S-Drive 225-35 17's which have maybe have 50 miles on them if that. Suspension:-Koni Adjustable struts/shocks that are stock on this car. Ground Control coilover kit, which raises or lowers the car. Exhaust: Stock, but i have the muffler tailpipe cut off because I bought a full 3" Turbos Unleashed mandrel bent exhaust system from the downpipe back (which I haven't installed) and also a Turbos Unleashed custom new style 3" swingvalve which also isn't installed. And a brand new 3" DC muffler. Fuel:-Super 60 external fuel pump. Everything else is factory. I am definitely forgetting things as this car has alot of work done to it. Any questions please email me.