1969 Ford Falcon

Coupe

6 - Cyl.

Automatic

Gasoline

Car runs and drives great. It has a 200 cubic inch inline 6 and a 3 speed automatic c4 trans. The exhaust is a clifford 6 into 2 header with 2 1/4" dual pipes. The front brakes were recently replaced (new drums, shoes, and hardware). I'll also throw in a set of 1969 Mustang Mach 1 spindles (very hard to find) for a disc brake conversion. The inner and outer tie rod ends and idler arm have been recently replaced (steering is very tight). It's been tuned up recently with new plugs, dizzy cap, rotor, points, condenser, and oil change. The trans filter and fluid are also new. Also included is a roller cam 302 that needs to be rebuilt, and possibly a new crank (journals are pretty scored and is already cut .020 under) that is disassembled. The car does have a bit of rust on the bottom of the quarter panels, fenders, and rocker panels, a 3 inch hole under the front of the driver seat, a 2 inch hole at the top of the driver footwell, and in the trunk floor area. The front carpet has been removed, and the bottom of the drivers seat is ripped. Included with the sale is a new right rear quarter panel, new rocker panels. a new fuel pipe, a mustang console shifter (column shifter has some play). I don't know if the odometer has been rolled, so odometer is in excess of mechanical limits on the title. I'm looking for a small pickup 5 speed 4 cylinder or small v6, so would also be willing to buy yours (within ebay rules of course : ). I'm usually available in the evenings and on Sunday if you wanna come take a look.