1985 Honda ATV

JH3TE080XFM025012

-

This is a very clean Honda 350X, which features a speedo, Cobra Pipe, 6-pack rack. Desert gas tank, The seat could stand to be replace. Below is factory spec. Manufacturer: Honda Model: ATC350X Honda released the following specifications for the 1985 through 1986 ATC350X models Maximum torque output: 21.7ft.lb @ 6000RPMs Maximum power output: 27PS (~26.4hp) @ 7000RPMs Starter type: forward kick Wheelbase: 50.0" Ground clearance: 4.7" Maximum load capacity: 270lbs Overall height: 42.6"(1985), 42.3"(1986) Overall length: 74.4" Overall width: 43.9" Seat height: 29.5" Foot peg height: 11.4" Fuel capacity: 2.65gal Engine weight: 91.5lbs Engine type: single cylinder, four-valve head, single over head cam, four stroke Fuel: unleaded Displacement: 350.4cc Bore: 81mm Stroke: 68mm Mechanical compression ratio: 8.5: 1 Corrected compression ratio: n/a Cold cranking pressure: 178psi Carburetor type: dual valve Lubrication type: forced pressure and wet sump Ignition type: CDI Ignition timing advance: 10 degrees Electrical system: Dry weight: 320lbs Final drive type: chain Transmission type: 6-speed, no reverse Clutch: manual Transmission primary ratio: 2.833: 1 Transmission 1st gear ratio: 2.750: 1 Transmission 2nd gear ratio: 2.050: 1 Transmission 3rd gear ratio: 1.609: 1 Transmission 4th gear ratio: 1.308: 1 Transmission 5th gear ratio: 1.103: 1 Transmission 6th gear ratio: 0.935: 1 Transmission final ratio: 3.077: 1 Front brake type: disk, twin piston Front brake quantity: 1 Rear brake type: disk, single piston Rear brake quantity: 1 Camber: 0° Caster: 23° Toe in: n/a Trail: 1.36" Rake: 23-degrees Front suspension travel: 8.0" Front shock leverage ratio: 1:1 Front shock type: telescopic fork Front tire size: 23.5x8-11 Front wheel type: aluminum Rear suspension travel: 7.6" Rear shock type: gas charged (nitrogen) Rear tire size: 22.0x10-9 Rear wheel type: aluminum