1988 Honda TRX250r

Not available

What you are looking at is a 1988 TRX 250r in great condition. Everything was kept spotless on this bike and everything was taken care of. It started off as a project bike to get the bike mint, but due to getting laid off i can no longer afford to keep it. The front end is a standard travel, +3 inch Burgard Cyle a-arms with Elka piggy back reservoirs set up for rider up to 190 pounds. The plastics are maier and the front fenders need 3 screws to hold it in place, also they are race cut. The clutch only has about 4 hours on it and so does the oil. The motor was just rebuilt by JPR Cycles at 1.5 over stock and only has about 6 hours on it. It has an LRD pipe and silencer. The rear tires and wheels are brand new! They wheels are Douglas and the tires are itp holeshots. The only thing that the bike needs is brake calipers and front wheels/tires. The reason why they were left off is because i was going to replace them but got laid off of work. You will not be disappointed, with a little bit of TLC this bike will be a masterpiece.