2003 Toyota Tacoma

Pickup

2.4L 4cl 2RZ Turbo

Manual

5TENL42N83Z185013

Clear

Gasoline

Selling my 2003 5spd Tacoma Turbo. It is a standard cab 2x4 5spd with gray interior. Has power steering and AC. Roll up windows and bench seat.I bought this truck used from a guy that had a canopy and a carpet bed liner on it. 100% bone stock, he even had a soft dash pad and seat cover on it. Exactly what I was looking for for my Turbo project. I'll list the thinks I have done to it coming from a 100% stock pickup. -All parts I bought brand new for this Truck. -lowered 3" front with springs, 4" blocks in the rear and it sits level. I also added air shocks to the back just in case I haul something and don't want it to sag.It doesn't hit the bump stops on any streets or fenders at all, rides really nice. -Tires are Pirelli 225/45/17s and wheels are 17x8 racing replica wheels. No curb rash, i bought the wheels and tires brand new and the tread is 90%+-I put in a Stage 4 clutch good for 400+ hp and a MLS Metal Head Gasket and ARP Head Studs. Otherwise the motor is stock.-It is a 2003 so it does have the pink top injectors that are good for 10psi but I have the stock Tial Waste Gate 8psi spring on it. -It has a full FMIC, Front mount intercooler with Tial BOV, blow off valve.-Manifold with 3" downpipe and Tial Waste Gate, '8psi spring' -After the DP the exhaust is Stock and No codes are shown.-It has the 5th injector and the URD MAF controller on it. -Precision Turbo 5531 JB, you can look up the specs on that, 520Hp capable. - It has a really nice catch can for both valve cover outlets with a drain tube.- too much to list. -Interior is stock and has a Wideband and Boost gauge on the A Pillar. Both Tow Max with Bosh Wideband o2 sensor. -the front and doors are in good shape, the box has a few dents on each side and the roof has a few scratches and a dent all shown in the pics. -It has some paint wear around the back of the cab where the canopy originally was rubbing on it also shown in the pics. My plan for this truck was setting it up the way I have so I can eventually do a stand alone computer and run it at 18-20 psi so I can hit that 400+ hp. However I am moving and can't put any more $ into it, I'm hoping to find someone that wants to take it from where it is now and keep going forward because it is all set up for the 400+ power if tuned correctly.I don't know what the power is now, but it feels good on pump gas at 8psi.The 5th injector is only there at the lower RPMs to keep the Air/Fuel % down until the Stock computer opens up and and dumps full fuel when under full boost. I would love to see this thing with an after market computer and tune! Feel free to ask me any questions though eBays message system only.